![background image](http://html.mh-extra.com/html/halytech/illuminator/illuminator_quick-start-manual_581625001.webp)
4
4. Wait 30 seconds
5. Open browser on PC and enter the following:
192.168.0.188
6. Log in, User Name is “user” and Password is “changeme” (without inverted
commas)
Configuring
Your
Illuminator
Once you have logged in, click “Settings”, then click “Change Settings” and:
1. Set date and time
2. Set username and password for security
3. Set Location & Lighting Setup– to your site name, help person details,
lighting details and costs
4. Optional - set up Status Inputs
5. Optional - set up Alarms and what you want to happen on the alarm
6. Set up Network parameters
7. Set up E-mail parameters
8. Set up your automatic reports
9. Exit Change Settings
Click “Users” on the main screen to set up a unique PIN for each user and choose the
fields they can access by clicking “Change” next to that user.
NOTE: the first user is the administrator with permanent access to all fields
Click “Lights” on the main screen and set periods in each weekday during which normal
users can control lights. Click any link in the "Today's Availability” column to change the
control periods for all fields.
Finally - it is strongly advised that you check e-mail functionality as described in
Appendix D of the User Manual.
Illuminator Quick Start Guide, revised 13/04/2016
© Halytech 2016
Tel: (02) 8814 5235 Email: [email protected]
PO Box 6983 Baulkham Hills Business Centre NSW 2153
ABN 51 094 853 068
Please refer to “Normal Operation” in the User Manual for detailed information.
Please refer to Appendix A “ Connecting to an Illuminator Locally” in the User
Manual for detailed information.
Please refer to “Setting up an Illuminator for the first time” in the User Manual for
detailed information.
Illuminator Quick Start Guide
V2.26
This guide is not a replacement for the User Manual. Please refer to the complete
Illuminator manual available for download from:
http://www.halytech.com.au/images/downloads/illuminator
Parts
List
(included
in
the
box)
1 x Illuminator
1 x Whip antenna and bracket
1 x Comms cable (red Ethernet crossover)
1 x connector bag containing:
o
4 x 8-pin I/O connectors
o
2 x 2-pin power connectors
o
1 x 4-pin Aux connector
o
8 x 120-ohm resistors (for 4-20mA inputs)
o
8 x protection diodes (to protect control outputs)
1 x Quick Start Guide (this document)
NOTE: A new Illuminator is shipped without a SIM card
Common
optional
components
(purchased
separately)
15V DC power supply
12V DC SLA (sealed lead acid) battery
Powder-coated steel enclosure
Keypad
External relays and contactors
Electricity meters