background image

Operation Manual – Getting Started 
H3C VG Series Voice Gateways 

Table of Contents

 

Table of Contents 

Chapter 1 Overview ....................................................................................................................... 1-1

 

1.1 Introduction to Voice Gateway........................................................................................... 1-1

 

1.2 VG Feature List.................................................................................................................. 1-3

 

Chapter 2 Fundamental Configuration........................................................................................ 2-1

 

2.1 Setting up Configuration Environment ............................................................................... 2-1

 

2.1.1 Setting up Local Configuration Environment through the Console Port ................. 2-1

 

2.1.2 Setting up the Local or Remote Configuration Environment by Using Telnet ........ 2-7

 

2.2 Command Line Interface (CLI) .......................................................................................... 2-9

 

2.2.1 CLI Views ................................................................................................................ 2-9

 

2.2.2 CLI Online Help ..................................................................................................... 2-11

 

2.2.3 CLI Error Information............................................................................................. 2-12

 

2.2.4 Displaying History Configuration ........................................................................... 2-12

 

2.2.5 CLI Editing Functions ............................................................................................ 2-13

 

2.2.6 CLI Display Functions ........................................................................................... 2-13

 

2.2.7 Shortcut Keys ........................................................................................................ 2-14

 

2.3 Login Security Management ............................................................................................ 2-14

 

2.3.1 Configuring a User ................................................................................................ 2-14

 

2.3.2 Terminal Security Features ................................................................................... 2-16

 

2.3.3 Configuring Login Authentication and Authorization ............................................. 2-16

 

2.4 Basic System Configuration............................................................................................. 2-18

 

2.4.1 Basic System Configuration and Management..................................................... 2-18

 

2.4.2 Displaying the Statistics of VG .............................................................................. 2-19

 

2.5 Ethernet Configuration ..................................................................................................... 2-20

 

2.5.1 Configuring Ethernet Interface .............................................................................. 2-20

 

2.5.2 Displaying and Debugging Ethernet Interface ...................................................... 2-24

 

2.5.3 DHCP Client Configuration Example .................................................................... 2-25

 

2.6 Default Route Configuration ............................................................................................ 2-25

 

 

Summary of Contents for VG Series
































Reviews: