Accuracy
2
User Guide
www.h2i.ch
18|11|21 Version N°1.0
H2i SA, 2017 Boudry, Switzerland
Copyright © 2021 H2i Sàrl
1. Measuring a watch with ONEOF Accuracy2
If the watch is equipped with a screw-down system, unlock the crown.
Fully wind the watch by turning the crown clockwise.
Place the watch on the sensor.
The crown should be placed in the center of the ONEOF logo.
The App detects the presence of the watch and starts its initializing process.
The frequency is automatically computed after a few seconds only.
The accuracy of the watch is displayed at the top of the screen after 2 to 60s,
depending on the time integration chosen in the settings.
The measurement will continue unless the watch is removed from the sensor.
