06/07/17
3652
1
3
1
1
1
1
1
2
CS 30056 - 45 RUE GASTON DE FLOTTE
13012 MARSEILLE CEDEX 12 (FRANCE)
TEL : 33.(0).4.91.87.51.20 - FAX : 33.(0).4.91.93.86.89
www.gymnova.com - [email protected]
Constantly aiming to improve our products, we reserve the right to make changes to the equipment and dimensions without further discussion.
Warning
This equipment should be installed by a qualified individual.
This equipment should only be used by one person at a time, under the supervision of a qualified individual.
Using this equipment for purposes other than those originally intended is prohibited.
Recommendations
As set out in French Standard NF S52-400 the following is recommended:
-
keep these instructions for subsequent reference (inspection, maintenance, etc.).
-
periodically carry out predictive maintenance.
-
depending on how much it is used have the equipment serviced yearly or every few years.
Pack list
1 Pack (Ref: 3652)
Dimensions: 610 x 410 x 240 mm
Weight: 6 kg
Volume: 0.06 m
3
I. Assembly of the cover
A
SSEMBLY
I
NSTRUCTIONS
R
EMOVABLE
B
EAM
C
OVER
M’16
KEEP THIS
DOCUMENT
Wipe over the existing body with a dry cloth to remove any unwanted particles (fragments of magnesium, etc.).
Fit the new cover
(1)
over the existing body: start with one end then fit the other end.
FRAGILE
Use the end caps
(4)
provided if necessary (end caps damaged or non-existent) for Gymnova beam bodies. Refer to
instructions NM135.
NM272B-GB
