GVA Lighting Highlighter HL-COVE Adjustable Installation Manual Download

Page: 1 / 5

ARNING

Do not attempt to install or use Luminaire until you read and understand this installation guide and safety labels.

Luminaires must be installed by a qualified professional in accordance with all national and local electrical and
construction codes and regulations.

Ensure that main power supply is OFF before installing or wiring Luminaire(s).

Do not exceed the specified voltage and current input.

GVA Luminaires have no serviceable parts. Do not attempt to open the units.

Do not use a luminaire with a damaged lens, body or cable.

Do not hot swap! Ensure power supply is off before connecting or disconnecting fixtures.

Not heading cautions may result in a hazardous situation which can cause propriety damage, injury or death.

SUPPLIED P

ARTS

HL-1200

HL-300

HL-Cables

HIGHLIGHTER™ Connector Cap

Mounting Screws

Adjustable Surface mount bracket

and / or

1 of 5

GVA Lighting, Inc.

3400 Ridgeway Drive, # 14

Mississauga, Ontario L5L 0A2 Canada

Installation Guide

Highlighter™

HL-COVE Adjustable

IG-HL COVE 02.01.13

Summary of Contents for Highlighter HL-COVE Adjustable





