background image

COPYRIGHT © JANUARY, 2022 BY GRIZZLY INDUSTRIAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

 OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

 #CS22213  PRINTED IN CHINA

Revised Inventory List

The following change was recently made since the owner's manual was printed:

• 

Workbench now comes with (8) hex bolts and a wrench to attach end frames, center frame, and upper 
supports to workbench top. There will be (8) M8-1.25 x 55 button head cap screws not used during 
assembly.

Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. 

IMPORTANT: Keep this update with the owner's manual for future reference.

For questions or help, contact our Tech Support at (570) 546-9663 or [email protected].

READ THIS FIRST

For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]

Model T1250

***IMPORTANT UPDATE***

For Machines Mfd. Since 12/21

and Owner's Manual Printed 11/17

Additional Items (Figure 1) 

Qty

I.  Hex Bolts 

5

16

"-18 x 2" ................................. 8

J.  Open-End Wrench 12mm ........................... 1

Figure 1. Additional inventory items.

9V2

9V2

9V2

9V2

9V2

9V2

9V2

9V2

1V2

16

Revised Parts

REF PART #

DESCRIPTION

1V2 PT1250001V2 WORKBENCH TOP 25 X 96 X 1-3/4 V2.12.21
9V2 PT1250009V2 HEX BOLT 5/16-18 X 2 V2.12.21
16

PT1250016

WRENCH 12MM OPEN-END

I

J

Summary of Contents for T1250







Reviews: