background image

COPYRIGHT © APRIL, 2020 BY GRIZZLY INDUSTRIAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

 OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

 #AI21082 PRINTED IN TAIWAN

The following changes were recently made since the owner's manual was printed:

• 

Terminal Bar Dust Box added to machine and main housing modified with mounting holes for dust box.

• 

Parts list and parts diagram have been revised.

• 

Wiring diagram has been revised.

Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. 

IMPORTANT: Keep this update with the owner's manual for future reference.

For questions or help, contact our Tech Support at (570) 546-9663 or [email protected].

READ THIS FIRST

For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]

Model G0798

***IMPORTANT UPDATE***

For Machines Mfd. Since 4/20 

and Owner's Manual Revised 5/17

Revised Parts Breakdown

Terminal Bar Without Dust Box

Terminal Bar With Dust Box

REF PART #

DESCRIPTION

14

P0798014

HEX BOLT 1/4-20 X 1-1/4

16V3 P0798016V3 MAIN HOUSING V3.04.20
18

P0798018

STAR KNOB 1/4-20 X 3/4

28

P0798028

TAP SCREW M4 X 16

36

P0798036

STRAIN RELIEF TYPE-3 M16-1.5 

57

P0798057

TERMINAL BAR DUST BOX

16V3

57

28

36

18

18

14

Summary of Contents for G0798







































Reviews: