background image

WARNING: You are the only person responsible for your personal safety. Do not (or let anyone) operate your Urban 

Ryder™ bicycle without reading the user manual, as you/they could be seriously injured or killed. All riders 
must: Familiarize yourself un  l you understand and are competent with all the controls and braking systems 
to correctly and safely operate the Urban Ryder™ in any riding condi  ons. Green Light Cycle Ltd.

 assumes 

no responsibility for your personal safety and by opera  ng this electric bicycle you acknowledge that you 
are competent with its opera  on and controls, have read the User Manual, are responsible for your own 
personal safety and accept Green Light Cycle Ltd.’s terms and agree to be bound by them. 

Do not operate or 

ride any Power Assisted Bicycle unless you are already a competent bicycle rider. The bike can quickly reach 
high speeds and cau  on must be exercised when opera  ng the Urban Ryder™. 

Carefully read this manual 

(even if you are an experienced rider) before riding your Urban Ryder™!

 You must wear a helmet and safety 

equipment, and obey all Provincial and Federal motor vehicle laws. An unprotected head is highly suscep  ble 
to injury,  even from the lightest contact, but wearing a helmet that meets UL or CSA tes  ng standards may help 
prevent injury.

2020

USER MANUAL

POWER ASSISTED BICYCLES

By

!

Summary of Contents for Urban Ryder

























Reviews: