Gingerway Technologies Co.,Ltd
Enjoy the Life
Dear users, sincerely thank you for choosing our products. For your convenience
of installing and using this product, please read this manual carefully before use.
GW-4361 is a high-end smart thermostat that with large graphic LCD screen and
capacitive touch keys.
GW-4361 can control the fan coil unit, air conditioner, the fan of heating device,
air valve, air valve, heater and other equipments. It can be used independently,
can also connect to Z-Ginger® wireless network to realize the intelligent control.
Descriptions
Touch Key Thermostat Instruction Manual
GW-4361
Illustration
Display area:
A. RT(room temperature) / SET(setting temperature):
Thermostat displays room
temperature by default, marked by "RT". After press the "Up" or "Down" key, it will
enter temperature setting interface. The displayed current setting temperature
marked by "SET".
B. Fan Speed:
With 4 types of fan speed: LOW, MEDIUM, HIGH, AUTO.
For AUTO type, when the room temperature differs 1
℃
from your setting
temperature, the thermostat will automatically change to low fan speed; when
the room temperature differs 2
℃
from your setting temperature, the themostate
will automatically change to medium fan speed; When the difference between
room temperature and your setting temperature over 3
℃
, the themostate will
automatically change to high fan speed.
C. Mode:
With 3 modes: Cooling, Heating, Ventilating. In the ventilating mode,
the fan speed without the option of "AUTO".
D. Timer:
Set a timing to start up or shut down the thermostat. In off-state, you
can set a timming to start up the thermostat; In on-state, you can set a timing to
shut down the thermostat.
E. Sleep Mode / P(low temperature protection):
At on-state, you can set the thermostat to sleep mode: Under cooling or heating
mode, the thermostat reverse heating or cooling 1
℃
in the 1st hour, and then
reverse heating or cooling 1
℃
in the 2nd hour. Then keep it to the end of sleep,
give you a comfortable sleep environment.
At off-state, you can set the thermostat to low temperature protection: when the
room temperature is below 5
℃
, the thermostat automatically start heating; When
the room temperature rises to 7
℃
, the thermostat will automatically stop heating.
1. Z-Ginger® full digital two-way communication wireless network.
2. Supports the cooling, heating or ventilating equipments of 2-pipe or 4-pipe and
three-speed fan, fit 7 types of heating/cooling equipments.
3. Supports independent control, also supports Z-Ginger® protocol wireless
network control.
4. With large graphic LCD, support multi-languages display.
5. With high sensitivity capacitance backlit touch keys.
6. Detect and display the environmental temperature.
7. Cooling/heating/ventilating mode for your selection.
8. Manual(3 speed) / automatic fan speed for your selection.
9. Power off memory function.
10.Timer on/off and sleep function.
11. Low temperature protection function.
12. Ultra-low power design, be suitable for universal power supply.
Main Features and Functions
Product Wiring Diagram
Scope of Application
Being used in hotel, commercial building and factory to control the fan coil unit, air
conditioner, heater and other equipments.
A.
RT(room temperature)
SET(setting temperature)
B. Fan Speed
C. Mode
D. Timer
E.
Sleep Mode /
P(low temperature protection)
F. ON-OFF /
Bind key
G.
Mode setting/
Timer setting
H.
Fan speed setting/
Sleep mode/
Low temperature protection
Keys Area :
F. ON-OFF / Bind key:
Short press this key to turn on/off the thermostat; Long
press it for 12 seconds to start to bind with gateway or controllers.
G. Mode setting / Timer setting:
Short press this key to switch the thermostat
mode; Long press it for 5 seconds, then you can set the timing to start up or shut
down the thermostat.
H. Fan Speed / Low temperature protection / Sleep mode setting:
Short press
this key to switch the thermostat fan speed; Long press it for 5 seconds, can set
to low temperature protection when the thermostat is on, and can set to sleep
mode when the thermostat is off.
I. Up key:
By default, short press it to turn up the setting temperature; When in
timer setting state, short press it to increase the timing time.
J. Down key:
By default, short press it to turn down the setting termerature;
When in timer setting state, short press it to decrease the timing time.
Open the thermostat, there are 3 selectable jumpers at the back of thermostat top
panel. You can choose the device type of thermostat via the jumpers:
0 (V3F3S): Default configuration (the jumpers are not welded), control 3-wire
electric valve and 3-speed fan. After the temperature reached, the valve and fan
will be shut down;
1 (V0F2): Control the electric air valve or electric air vent;
2 (V2F3C): Contrl 2-wire electric valve and 3-speed fan. After the temperature
reached, the electric valve will be shut down, the fan will continue to run;
3 (V2F3S): Control 2-wire electric valve and 3-speed fan. After the temperature
reached, the electric valve and the fan will be shut down;
4 (V3F3C): Control 3-wire electric valve and 3-speed fan. After the temperature
reached, the electric valve will be shut down, the fan will continue to run;
5 (V4F3C): Apply to 4-pipe system, to contyrol electric cold and heat valve(2-wire
valve) and 3-speed fan. After the temperature reached, the electric valve will be
shut down, the fan will continue to run;
6 (V4F3H): Control electric cooling and heating valves(2-wire valve) and 3-speed
fan. After the temperature reached, the electric valve will be shut down. the fan
will continue to run in Cooling mode. If in Heating mode, only control the electric
valve, the fan is closed at any time;
7 (HEATER): Being used for controlling floor heater. Only with Heating mode, the
thermostat will automatically enter into low termperature protection status after it
turned off, the temperature of low temperature protection is 15
℃.
FAN
L
N
L
M
H
ON
OFF
VALVE
3-SPEED FAN
100
～
240VAC 50/60H
Z
0 (V3F3S)
4 (V3F3C)
I.
Up key
J.
Down key
V1.2
L
N
L
M
FAN VALVE
100
～
240VAC 50/60H
Z
1 (V0F2)
