G4201C
G.hn Master and Client
Quick start guide
For further information and purchase enquiries
please contact
1.
Introduction
With the G.hn modem G4201C you can easily extend
your network via existing coaxial cables.
It can use any type of coaxial cable for data transmission
and achieves a speed of approx. 1600 Mbit/s (sum of
both transmission directions).
The units can be connected both "point-to-point" (one
master and one client) and "point-to-multipoint" (one
master and up to 15 clients).
In networks with more than 15 clients distributed over
several coaxial cables, a G.hn switch G4200C can be used
(see installation). It provides the full bandwidth of 1600
Mbit/s on each cable strand, up to 90 clients are
supported. The switch also enables central
administration of all G.hn components.
2.
Package content
G4201C Master or Client
DC-12V/1A Power adapter
1,5m Coax-QuickFix connection cable
3.
Technical data
Dimensions: 111.5*83*24.5mm
Weight: 0,19kg
Operating temperature: 0°C - 40°C
Power consumption: < 3 Watt
4.
G.hn Specification
G.hn Wave2, 2-200 MHz
Bandwidth: 1600 Mbit/s
Maximum permissible attenuation of the cable
connection: 75dB
5.
Ports
Panel and LED description
Labelling
Description
12V DC
Power connection
RST
Recessed reset button (15 Sec.)
LINE
G.hn port
GE
Gigabit Ethernet Port
PWR LED
Displays power availability
LINE LED
tatus of the G.hn connection
(Green - OK, Yellow - weak signal,
Off - no connection)
GE LED
Ethernet connection status
