English
-1-
I
mportant Notice:
Please install the driver first and then
connect VideoCAM Slim USB2 to the USB
port.
Please read the important notice before the installation.
1.
Installing VideoCAM Slim USB2 software
a.
Insert the VideoCAM Slim USB2 software CD into CD-ROM drive.
b.
After few seconds, the setup screen will show the picture of
VideoCAM Slim USB2. Click the “
Utility Driver
” then simply
follow the on-screen instructions.
c.
Please remember to install
DirectX
of the CD-ROM.
Notice:
If the setup screen doesn’t show the picture of VideoCAM Slim
USB2, please precede the following installation:
z
Go to the taskbar and click Start then Execute.
z
Type D
：
\SETUP.EXE , then click Enter key.
(Suppose your CD-ROM is in Drive D)
2.
Connect the VideoCAM Slim USB2 to
your computer.
Connect the VideoCAM Slim USB2 to the
USB port as shown on the right drawing.
3.
To get rid of driver installation, please
go to the taskbar and follow “Start
Æ
Program
Æ
VideoCAM Slim USB2
Æ
VideoCAM Slim USB2 Uninstall, then follow the on-screen
instruction to remove the installation.
USB Port
4.
You can install the recognize software for video conferencing
or chat with your friends.
