31-5000582 Rev. 0 01-21 GEA
RAKUVC1 and RAKUVC2 kits are designed to work with Zoneline AZ45 and AZ65 models with an
engineering digit of 5 or greater.
Installation Instructions
for your new
RAKUVC1
RAKUVC2
PTAC UVC Kit
Before you begin - Read these instructions completely and carefully.
IMPORTANT – OBSERVE ALL GOVERNING CODES AND ORDINANCES.
Note to Installer – Be sure to leave these instructions with the Consumer.
Note to Consumer – Keep these instructions with your Owner’s Manual for future reference.
Parts Included
• Junction Box Assembly
• UVC Air Cutoff Assembly
• UVC Main Board Assembly
• UVC Wiring Harness
• Ground Wire
• Polybag with Screws
Tools Needed
• 5/16” Nut Driver
• 1/4” Nut Driver
•
High Voltage discharge pliers
Installation Overview
GE is a trademark of the General Electric Company. Manufactured under trademark license.
Junction Box Assembly
$LU&XWRႇ$VVHPEO\
Main Board Assembly
Wiring Harness
