![background image](http://html1.mh-extra.com/html/galvin-engineering/170-01-13-00/170-01-13-00_installation-manuallines_3296734001.webp)
© Galvin Engineering Pty Ltd
Product Installation Guidelines
Version 1,13
th
June 2023, Page
1
of 4
Ezy-Drink
®
CP Lead Safe
™
2 in 1 Bottle Filler & Bubbler
45 Degree
PRODUCT CODE
-
170.01.13.00
SPECIFICATIONS
2 in 1 design with bottle filler and bubbler.
Drinking taps are designed to operate at full mains pressure.
The rubber mouthguard is resistant to fungal and bacterial attack and has a high resistance to sunlight.
Vandal resistant push buttons.
Adjustable built-in flow restrictor.
IMPORTANT
: All Ezy-Drink
®
2 in 1 taps are tested in accordance with AS/NZS 3718 and leave our premises
in good working order.
*As ‘lead free’ is not currently defined by law in Australia and New Zealand, we have based our definition of Lead Safe™ on the requirements of s1417 of the USA’s Safe Drinking
Water Act (SDWA) and the relevant US standards NSF61 / NSF372. The SDWA defines ‘lead free’ as “not more than a weighted average of 0.25% lead when used with respect
to the wetted surface of pipes, pipe fittings, plumbing fittings and fixtures”.
WARNINGS:
Special attention to be paid on notes, photos, images, or drawings of assembly
steps marked
with the warning symbol.
TECHNICAL DATA
Inlet
½” BSP Female
Outlet
Rubber Mouthguard/Bottle Filler
Headwork
Push Button
Working Pressure Range (kPa)
Min
50
Max
500
Working Temperature Range (°C)
Min
5
Max
60
Nominal Flow Rate (LPM)
2.98
Construction
Brass
Finish
Chrome
NOTE:
Galvin Engineering continually strive to improve their products. Specifications may change without
notice.
TOOLS REQUIRED
Power drill
Wrench
Screwdriver