![background image](http://html.mh-extra.com/html/gallo-tech/gts-2/gts-2_operation-and-installation-manual_559366001.webp)
© Copyright
Gallo Technologies
. All Right Reserved
- 1 -
Rev. V8.2- 20212
Operation & Installation Manual (V8.2)
Keyless
Model # GTS – 2
Keyless RFID Push Button Start & Security System
DISCLAIMER:
This installation manual is designed for the professional installer with a good understanding of automotive electrical
systems, and if the vehicle is so equipped, the ability to disable the steering column locking mechanism. To ease in
proper installation, we recommend that the installer READ THIS MANUAL thoroughly before beginning the
installation. This manual is provided as a GENERAL GUIDELINE and the information contained herein may differ
from your vehicle. Gallo Technologies and its’ vendors shall not be liable for any accident resulting from the misuse
of this product. This product is designed to be professionally installed into a vehicle in which all systems and
associated components are in perfect working condition. DAMAGE to the GTStarter-2 unit resulting from incorrect
installation or failure to follow guidelines stated in this manual, will not be covered under warranty and will be subject
to repair or replacement charges. Links to nation-wide Alarm installers can be found on our web site at
www.GalloTech.com
.
Table of Contents
1.1 Introduction (page 2)
1.2 Remote Key FOB Operation (page 3)
1.3 “PUSH START STOP” BUTTON OPERATION (page 5)
1.4 GTStarter-2 Function Options (page 6)
1.5 Key FOB & Programming Function Set Up (page 8)
1.6 Installation Instructions (page 9)
1.7 Final Installation (page 14)
1.8 Troubleshooting (page 15)
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
www.GalloTech.com