![background image](http://html.mh-extra.com/html/fukuda/fre-102ag/fre-102ag_instructions-manual_2344823001.webp)
FRE-102AG
INSTRUCTIONS
from
LASER LEVELS ONLINE
www.laser-level.co.uk
Tel: 01246 269777
Thank you for purchasing the Fukuda
FRE-102AG
GREEN
beam, rotary laser
kit. These instructions are intended to explain the
quick basics
to operating
this equipment. Please read them carefully.
If you need any more help/advice or the instrument requires calibration or
repair, then please contact our Service Dept on
tel. 01246 269 777 or fax 01246 260 007. We would be pleased to help.
Power source:
The FRE-102AG has a special rechargeable battery pack located in the front
base of the laser. To change: unscrew the silver lock, slide out to remove &
carefully refit. It contains 4pc x "sealed for life" Ni-MH type C, 4000mAh, 1.2V
cells. Please note that this battery pack can be charged either in or outside of
the laser. The Mains Charger (supplied) will charge these batteries in around
7 - 8 hours to give up to 30 hrs of continuous use. It takes 4 to 5
charge/discharge cycles for this battery pack to reach its maximum capacity.
1