background image

1F02 2881

*1F022881*

TABLE OF CONTENTS

Thank you very much for purchasing our cooker hood.

Please read this manual thoroughly before installing/operating 
the cooker hood.

Keep this manual properly for future reference after reading.

To the sales shop/installer: 

after installation, please 

provide this manual to the 

user without fail.

Cooker Hood

Installation/Operation Manual

English   page 1~20

简体中� 21 ~ 40 页

�體中� 41 ~ 60 頁

FR-FS2270/90VP 

(Ventilating type)

FR-FS2290RP 

(Recycling type)

Safety Precautions ...............2~4

Precautions on use ......................4

Preparation ...........................5, 6

Name of parts ..............................5
Switch ..........................................6

Installation ..........................7~14

Preparation and checking 

before installation ...................7, 8

Preparation before installation ...9, 10
Cooker hood installation  .....10~13
Reattaching the removed parts ...13, 14

Operation checking ...................14

Maintenance ....................14~18

Precautions for maintenance .....15
Detaching/Attaching of parts 

to be cleaned .....................15~17

Cleaning .....................................18

Other Information .............18, 19

Specifi cations ............................18
Circuit diagram ..........................19
Service and warranty .................19

Summary of Contents for FR-FS2270/90VP









































Reviews: