background image

Part No. GZ7340 R0206A

Printed in USA © 2006 ICON IP, Inc.

®

CAUTION

Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

Model No. GZFI8033.5
Serial No. 

Write the serial number in the
space above for future reference.

Serial Number Decal 

(inside tower)

QUESTIONS?

At FreeMotion Fitness, we are
committed to providing com-
plete customer satisfaction. If
you have questions, see HOW
TO CONTACT CUSTOMER
CARE on the back cover of this
manual.

Visit our website at

www.freemotionfitness.com

HOW TO CONTACT CUSTOMER CARE

If you have questions after reading this manual, or if you require assistance, please contact Customer Care at
the address and phone number listed below. Please be prepared to give the following information:

• The MODEL NUMBER of the product (GZFI8033.5).

• The NAME of the product (FREEMOTION EPIC LEG CURL strength equipment).

• The SERIAL NUMBER of the product (see the front cover of this manual).

• When ordering replacement parts, please also give the KEY NUMBER and DESCRIPTION of the part(s) (see

the PART LIST and the EXPLODED DRAWING on pages 14 and 15 of this manual).

Customer Care: 1-800-201-2109, Monday–Friday, 8 a.m.–5 p.m. Mountain Time

FreeMotion Fitness, Inc. • 1096 Elkton Dr., Suite 600 • Colorado Springs, CO 80907

OWNER’S
MANUAL

 

Summary of Contents for GZFI8033.5

















Reviews: