Operating Instructions
CONNECTING AND OPERATING
1) Connect the audioI input source into transmitter over audio cable.
2) Connect the output of transmitter and input of receiver over CAT5E or CAT6
cable.
3) Connect the audio output into the receiver over audio cable.
4) Connect power adapter in to the transmitter.
NOTE: Insert/Extract cables gently.
WARRANTY
If your product does not work properly because of a defect in materials or
workmanship, our Company (referred to as "the warrantor" ) will , for the length of
the period indicated as below,
(Parts(2)Years ,Labor(90) Days)
which starts with
the date of original purchase ("Limited Warranty period"), at its option either(a) repair
your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must
mail-in your product during the warranty period. This Limited Warranty is extended
only to the original purchaser and only covers product purchased as new. A
purchase receipt or other proof of original purchase date is required for Limited
Warranty service.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to
clean this unit.
PRODUCT SERVICE
1)
Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in performance;
(e) The unit has been dropped or the cabinet damaged.
2)
Servicing Personnel:
Do not attempt to service the unit beyond that described in
these operating instructions. Refer all other servicing to authorized servicing
personnel.
3)
Replacement parts:
When parts need replacing ensure the servicer uses parts
specified by the manufacturer or parts that have the same characteristics as the
original parts. Unauthorized substitutes may result in fire, electric shock, or other
hazards.
4)
Safety check:
After repairs or service, ask the servicer to perform safety checks
to confirm that the unit is in proper working condition.
4
Operating Instructions
Digital&Analog Audio Converter
Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
FEATURES
Support HDMI ARC/Toslink/Coax digital audio input;
Support Toslink,Coax,Analog 3.5mm jack,L/R audio output;
Support slide switch audio input source;
Support digital audio output:DTS/Dolby-AC3/LPCM;
Support analog audio PCM2.0,sampling rate 32-192KHZ,16~24bit;
Support digital audio max CH5.1, 96KHZ,16~24Bbit;
Support AC 100~240V 50/60hz power, DC 5V/1A;
NOTICE
Our company reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
1
