Overlap Apex Shed
7' x 7'
Important :
Assembly of this
shed requires a
minimum of two
adults.
B
OPA7PE
PLAIN END
OPA7WS
WINDOW PANEL
207012358
ROOF SHEET
QTY 2
D
E
F
A
OPA77DD PARTS LIST
BRDFL37
FLOOR QTY 2
DDRPT
DOOR
QTY 2
OPA7DDE
DOOR END
44161570PT
1570mm C/STRIP QTY 4
H
M
J
45281630PT
1630mm BATTEN QTY 1
G
2
1
1
C
OPA7PS
PLAIN PANEL
3
REQUIRED TOOLS :
(NOT SUPPLIED)
HAMMER
59121273PAII62PT
1273mm BARGE BOARD QTY 4
K
H
Must Pre-drill for
each screw used.
37282070PT
2070mm BATTEN QTY 2
O
L
FELT QTY 1
FELT4BLROSE
Place the panels on top of the floor. Make sure that all the panels are tight and flush before fixing
them to each other using 3x50mm screws.
Make sure that the panels are tight and are sitting flush before fixing each panel to the floor using 3 x
50mm screws making sure that all of the screws are locating into the bearers underneath.
Fixing Pack (OPA77DDFP)
This fixing pack is used for several products.
There may be additional fixings.
Not to Scale
Flush Hinge
Qty 4
50mm Screw Qty 28
30mm Nail Qty 80
25mm Screw Qty 39
Hasp & Staple
30mm Screw Qty 22
10mm Felt tacks
Qty 120
Place the hinges against the batten on the side of the door in line
with the battens on the back. Fix the inner/smaller part of the hinge
to the door using 25mm screws.
Place the Door into the Door End ensuring that the door is square
and fix the outer part of each hinge to the framing of the door end
using 25mm screws.
I
FIN20010512PTR
FINIAL
QTY 1
SHARP KNIFE
IMPORTANT, RETAIN FOR FUTURE REFERENCE; READ
CAREFULLY
Check all parts prior to assembly
This building is pressure treated to ensure longevity of all
timber components and to protect against rot. This may leave
a colour difference on some parts that will even out as the
moisture content stabilises. This will not need additional
treatment.
- This product must be built on a solid level base.
- The roof of this building is not a load bearing structure.
- Please keep all plastic bags and small parts away from
children
- Timber is a natural material. It will shrink and swell as a
result of varying moisture content.
- Due to the nature of the material the doors may need some
trimming for a neater fit.
Technical Helpline:
0333 7777 089
8.30 am and 5.00
pm Monday to Friday.
In line with your statutory rights, please check all parts prior
to assembly, as assembly of damaged parts may be deemed
to be acceptance and this may affect the remedies you are
entitled to.
If the product is not constructed in accordance with the
instructions, or is altered in any way (e.g. painted), the
manufacturer cannot be held liable for any resulting damage.
37281982PT
1982mm BATTEN QTY 4
Z’ bracket Qty 8
Ridge Plate
60mm Screw Qty 3
PCWIN1
WINDOW QTY 2
45120675PPT
675mm STRIP QTY 1
P
Fix the two floor sections together
using 3 x 50mm screws.
Top View
E
B
C
D
A
STEP LADDER
40mm Screw Qty 12
Turn Button
Qty 2
84996
PLASTIC L’ STRIP QTY 4
N
The windows are packed
together tightly, separate
before assembly.
Place the corner strips so that they cover the joins between
the panels. Fix each in place using 3 x 30mm screws.
L
4
Place the 1630mm batten against the inside of the door so that
it is tight against the battens on the reverse of the door and
leaves a small gap at the top and bottom. Fix the batten in
place with 3 x 60mm screws.
Fix a turn button to the top and bottom of the batten so that the
door will be held closed when fixed. Use a 30mm screw for
each turn button.
5
flush
J
SCISSORS
FLAT HEAD
SCREWDRIVER
POZI DRIVE
SCREWDRIVER
TAPE MEASURE
25mm Security Screws
Screws Qty 14
F
