background image

1270 

Operating Manual

Special Anniversary Edition Metal Detector

F I S H E R     R E S E A R C H     L A B O R A T O R Y

Q U A L I T Y

Fisher detectors are renowned for their quality. 

Each detector is hand crafted in the USA with pride

P E R F O R M A N C E

Treasure Hunters worldwide rely on Fisher.

Our detectors are durable, dependable, and search deeper..

R E P U T A T I O N

Fisher produced the first patented metal detector in 1931. For 
over 70 years, the Fisher logo has been a mark of excellence.

5 - YEAR LIMITED WARRANTY

Fisher believes in the products we produce and backs this belief 

with a 5 year limited warranty. Warranty may vary outside of  

the United States. See your dealer for details

S E R V I C E

Fisher is committed to providing you, our valued customer, with 

superior service. Each and every instrument is rigidly tested 

and carefully inspected during assembly and before shipment. 

Should you have any questions or problems, contact:

FISHER RESEARCH LABORATORY

200 West Willmott Road.,

Los Banos, California 93635

Tel 209.826.3292   Fax 209.826.0416

www.fisherlab.com   

email:[email protected]

for a dealer near you

1.800.M-SCOPE.1   1.800.672.6731

FRL8704776-A

1270manual-.indd   1

6/13/06   2:50:08 PM

Summary of Contents for M-SCOPE 1270











Reviews: