background image

1

CJV00

fisher-price.com

IMPORTANT!

 Please keep this instruction 

sheet for future reference, as it contains 
important information.
• Please read these instructions before 

assembly and use of this product.

• Adult assembly is required. Tools needed for 

assembly: Phillips Screwdriver (not included). 

Assembly instructions on back side of 
this sheet.

• Requires three C (LR14) 

alkaline

 batteries 

(not included) for soothing unit operation.

• Use from birth until child is able to sit 

up unassisted.

• Product features and decorations may vary 

from photographs.

¡IMPORTANTE!

 Guardar estas instrucciones 

para futura referencia, ya que contienen 
información de importancia acerca de 
este producto.
• Leer estas instrucciones antes de ensamblar 

y usar este producto.

• Requiere montaje por un adulto. Herramienta 

necesaria para el montaje: desatornillador de 
cruz (no incluido). 

Ver el dorso de esta hoja 

para las instrucciones de montaje.

• La unidad relajante funciona con 3 pilas 

alcalinas

 C (LR14) x 1,5V (no incluidas).

• Usar a partir del nacimiento y hasta que el 

bebé pueda incorporarse por sí solo.

• Las características y decoración del producto 

pueden variar de las mostradas.

• Slide the power switch   to ON or OFF.
• Press the vibration button 

 to turn 

vibrations on. Press again to turn it off. 

• Press the music 

or sound effects 

 button to play sounds. Press 

again to turn music or sounds off. 

• Press the volume buttons 

 to adjust 

the volume level.

• Poner el interruptor de encendido   

en ENCENDIDO o APAGADO.

• Presionar el botón de vibraciones 

 

para activar vibraciones. Volver 
a presionarlo para apagarlas. 

• Presionar el botón de música 

 

o efectos de sonido 

 para activar 

sonidos. Volver a presionarlos para 
apagar la música o los sonidos.

• Presionar los botones del volumen 

 

para ajustar el volumen.

Summary of Contents for CJVOO













Reviews: