Earglove BlueVoice™
Wireless Headset
QUICK REFERENCE GUIDE
To turn the unit on:
Press and hold the on/off switch for 2 seconds. The LED will flash
green every 5 seconds.
To initiate the pairing process:
Simply turn on the headset. Unit remains pairable for 3 minutes.
The LED light will flash green and red.
To force headset into pairing mode:
Slide and hold volume switch up for 7 seconds until LED flashes
green and red. Headset is pairable for 2 minutes.
To answer a call or transfer call from phone to earpiece:
Press the answer/end button once.
To end a call:
Briefly press the answer/end button once or terminate the call from
your cellular phone.
To adjust volume:
To increase the volume, slide volume switch up (+) for each
incremental level. To decrease the volume, slide volume switch
down (-) for each incremental level.
To turn the unit off:
Press and hold the on/off switch for 2 seconds. The LED will flash
green once, then power off.
