background image

1

Electric Air Handler

TABLE OF CONTENTS

SERIES NOMENCLATURE  . . . . . . . . . . . . . . . . . . . . . . . .1

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS  .1

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

INSPECTION AND UNPACKING . . . . . . . . . . . . . . . . . . . .2

NOTES TO INSTALLER  . . . . . . . . . . . . . . . . . . . . . . . . . . .2

INSTALLATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Power Considerations  . . . . . . . . . . . . . . . . . . . . . . .2

Electric Heat Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Location  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Clearances  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Upflow Application  . . . . . . . . . . . . . . . . . . . . . . . . .3

Horizontal Applicaton  . . . . . . . . . . . . . . . . . . . . . . .4

Downflow Application . . . . . . . . . . . . . . . . . . . . . . .5

Connect Refrigerant Piping  . . . . . . . . . . . . . . . . . . .6

Factory and Field installed Expansion Valves  . . . . .6

Ductwork  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Return Air Ducting  . . . . . . . . . . . . . . . . . . . . . . . . . .7

Return Air Platform Height  . . . . . . . . . . . . . . . . . . .7

LINE VOLTAGE CONNECTIONS . . . . . . . . . . . . . . . . . . . .7

24 VOLT CONTROL SYSTEM  . . . . . . . . . . . . . . . . . . . . . .8

CONDENSATE PLUMBING . . . . . . . . . . . . . . . . . . . . . . . .8

WIRING DIAGRAM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

DIMENSIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

BLOWER SPEED/STATIC OPERATION TABLE  . . . . . . . .11

ELECTRIC HEAT KIT  . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Heating Specifications  . . . . . . . . . . . . . . . . . . . . . .13

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

NOTE: 

THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED
SERVICE PERSONNEL FOR PROPER INSTALLATION,
ADJUSTMENT AND OPERATION OF THIS EQUIPMENT. READ
THE ENTIRE INSTRUCTION MANUAL THOROUGHLY BEFORE
ATTEMPTING INSTALLATION OR OPERATION.

 

Summary of Contents for AFPB24B1

















Reviews: