background image

- 1 -

PCS-516 DUO

Time relay,

10-function

The PCS-516 DUO time relay is used for time control in industrial 

and home automation systems (such as : ventilation, heating, 

lighting, signaling, etc.).

A

A. ON delay

After the supply voltage is switched on (the green LED U is on), 

the contact remains in position 11-10 and the set operating time 

counts down. After the preset time has elapsed, the contact swi-

tches to position 11-12 (the red LED   is on). To execute the 

operating mode of the relay again you need to switch off the 

power supply voltage and switch it back on.

Purpose

Features of work

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Summary of Contents for PCS-516 DUO












Reviews: