Fancy Kitty Kitten Drum Carder
Anderson Originals & Fancy Kitty Products
321 East Prime Street
Downing, MO 63536
Phone 660 379 2323 Mon-Fri 9-5pm Central
Email:
PLEASE BE AWARE!
1. This product has sharp pointed wires
2. Extreme care must be taken in its use
3. Improper use may cause serious injury
With the exception of the screw on handle, the Kitten
will arrive fully assembled and ready to use at no
extra charge.
Handle Installation instructions
Figure A may be used to reference all parts and locations for the handle assembly.
4. Insert the screw (handle & mounting screw) into the handle mounting hole. The hole is threaded.
5. Turn the screw gently to start the threading process. When the screw is screwed into the mounting
hole all the way, back it up approximately ½ turn. Check to make sure the handle turns freely. If it
is to tight or to loose adjust accordingly.
6. Place the locking nut on the mounting screw on the rear of the mounting hole. Tighten the locking
nut using the 7/16 inch wrench (not included), while holding the mounting screw with the Phillips
screw driver (not included), this will lock the handle in place and it will not loosen when carding.
7.
