background image

1

TLP Pro 725C Series • Setup Guide

Overview

The Extron TLP Pro 725C is a 7 inch Cable Cubby touchpanel with a flip-up, 1024x600 (WSVGA) LCD touchscreen with 
24-bit color depth. The TLP Pro 725C NC is a streamlined version of the touchpanel, with a set of features designed to adhere 
to government and military security protocols. Either model is ideal for any AV application requiring a full-size, Cable Cubby 
touchpanel with a customizable interface. This guide provides instructions for experienced installers to mount and install the 
TLP Pro 725C series touchpanels. For more complete instructions, see the 

TLP Pro 725C User Guide

, at 

www.extron.com

.

Setup Checklist

Get Ready

 

…

Download and install the latest version of the following software:

 

…

GUI Designer

 — For designing layouts for Extron TouchLink

®

 Pro touchpanels and third party touch interfaces. 

 

…

Global Configurator

®

 Professional and Global Configurator Plus

 — For setting up and configuring the control 

processor and touchpanel.

 

…

Toolbelt

 — Provides device discovery, device information, firmware updates, and configuration of network settings, 

system utilities, and user management for TouchLink Pro devices.

 

…

Global Scripter

®

 — Provides an integrated development environment for Extron control systems programming.

NOTE:

  All four software programs are available from 

www.extron.com

.

 

…

Obtain the following network information from your network administrator:

 

…

DHCP status

 — (on or off). If DHCP is off, you must also obtain:

 

…

IP address 

 

…

Subnet mask

 

…

Gateway

 

…

User name

 — This can be either 

admin

 or 

user

.

 

…

Password

  — By default, this is 

extron

 (for either admin or user).

 

…

Make a note of the touchpanel MAC address.

 

…

Make sure you are familiar with all the included parts and have all the necessary tools (see page 2) for installing the cable 
cubby.

Included Parts

Check that all the following parts are included when the touchpanel is received.

TLP Pro 725C (1)

#4-40 Screw (8)

#6-32 Screw (8)

#6 Star Washer (8)

3/8” Hole Plug (12)

1/4” Hole Plug (4)

8-cable Cable

Pass-through Plate (2)

3-space

AAP Frame (2)

3-space

Connectivity

Bracket (2)

Figure 1. 

Included Parts (and Number Provided)

NOTE:

 

Active or Passive AAPs must be purchased separately (

www.extron.com

).

Summary of Contents for TouchLink TLP Pro 725C Series









Reviews: