background image

Explore reserves the right to make changes without further notice to any products herein to improve reliability, function or design. 
Explore does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it 
convey any license under its patent rights nor the rights of others. Explore products are not designed, intended, or authorized for use as 
components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any 
other application in which the failure of the Explore product could create a situation where personal injury or death may occur. Should 
Buyer purchase or use Explore  products for any such unintended or unauthorized application, Buyer shall indemnify and hold Explore 
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and 
reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or 
unauthorized use, even if such claim alleges that Explore was negligent regarding the design or manufacture of the part.

User Guide — EP9134_UG V0.7

Explore Confidential Proprietary

NON-DISCLOSURE AGREEMENT REQUIRED

1

4 Ports HDMI 1.3 Splitter

EP9134

User Guide

V0.7

Original Release Date: Aug. 27, 2007

Explore

      Revised: Nov. 23, 2009

Explore 

Microelectronics 

Inc. 

ug. 2

g

Confidential 

27,

27

for

南京东平电子

or

 Internal 

Exp

Exp

Use 

Only

2007

007

Summary of Contents for EP9134































Reviews: