background image

 

1
 

 

 

Release Note for Quarter 1 2012 SD DVR Firmware Releases 

Release Date:

 1/27/2012 

January 27, 2012: Paragon264-16X4 and ECOR-4D (MPEG4) Internet Explorer 9 for Windows 7 

operating system web interface compatibility

 

This firmware release adds several new features and functions which fall into three general 

categories: (1) Applies to remote access via LAN or WAN only; (2) Applies to local control at the 

DVR front panel; and (3) Applies to both LAN/WAN and local/Front Panel operation: 

 

1. Windows7 IE9 (32-bit) Compatibility Network Connectivity 

(1)

 

Windows7 64-bit operating 

system has two versions of Internet Explorer 9 (32-bit and 64-bit). When accessing the DVR please 

use Internet Explorer 9 32-bit browser. 

 

2. Remote Reboot

 

(2) (1)

 – (optional) users can enable a remote command to reboot the DVR via 

the web interface. The check box to enable this feature appears only in the DVR local System 

Menu at the bottom of the “Misc.” screen.  The button which reboots the DVR is located only in the 

web interface System Menu at the top of the “Misc.” screen. If the Internet Explorer window is left 

open after clicking on “Reboot Now”, the screen will indicate a break in the network connection 

during the reboot process, after which the DVR will reconnect.  Change screens to refresh the 

display and view updated information. 

         

 

 

 

 

 

 

 

 

3. Network Test

 

(2)

 –To verify basic network connectivity 

between the DVR and some other LAN or WAN node, the user 

can issue an ICMP Ping to a valid IP address. The Ping utility is 

useful in diagnosing connectivity problems by obtaining 

responses from nodes progressively farther along the network. 

Summary of Contents for ECOR4D









Reviews: