background image

 
 
 
 
 
 
 
 

 

1.0 Introduction 

Don't have time to take your jewelry to be serviced every time you want 
to restore its original luster? Look no further! The Sonic Wave CD-2800 
Ultrasonic Cleaner is a powerful cleaning machine that will gently clean 
your valuables in minutes. All you need to achieve professional 
cleaning results is 1 pint (16oz) of ordinary tap water. Simply fill the 
stainless steel cleaning chamber with water and the 42,000 cycle 
ultrasonic energy wave feature will sweep away dirt, dust, and grime, 
leaving your precious items looking like new. The CD-2800 is a trusted 
cleaning method for professional jewelers, opticians, collectors, dental 
labs, dentists, and artists. 
 

Please read all instructions and warnings before operating this 
machine. 

1.1 Package Contents 

 1 ultrasonic cleaner machine 

 1 plastic arc for cleaning watch bands 

1.2 Features 

 Tank size: 1 pint capacity (16 fluid oz, 600 ml) 

 42,000 cycle energy wave 

 3 minute auto shut off 

 Power Supply: 100-120 V, 60 Hz, 35 W 

1.3 Safety Information 

1. Only use machine for its intended uses as described by this 

manual. 

2. 

Never

 leave the machine unattended while it is plugged in. 

3. Always unplug machine immediately after using. 
4. Close supervision required when used in close vicinity to children. 
5. 

Do not 

use the product in or near water. 

6. 

Do not 

place or store the machine in or near a sink or tub where it 

might be in danger of falling into the water. 

7. 

Do not 

fully submerge the machine in water while trying to clean it. 

Clean with damp, not dripping wet cloth, and dry with a soft towel. 

8. 

Do not

 use attachments not recommended by the manufacturer. 

9. 

Do not 

operate this machine if its cord or plug are damaged, if it is 

not working properly, if it has been dropped or damaged, or if it has 
fallen into water. Return the product to a service center for 
examination and repair if any of the previous situations occurred.  

10. 

Do not

 let the machine run while sleeping or operate it while 

drowsy. 

11. 

Do not

 drop or insert any object into any opening or hose. 

12. Keep the cord away from heated surfaces. 
13. This appliance has a polarized plug (one blade is wider than the 

other). For your safety the plug will only fit into the outlet one way. 
If the plug does not fit in the outlet reverse the plug. If it still does 
not fit contact a qualified electrician. 

Do not

 attempt to alter this 

plug or outlet to get it to fit. 

14. When the product is subjected to electromagnetic interference like 

fast transients or surge voltage you may not be able to turn the 
product on or off. To fix this problem unplug the machine and plug 
it in again. After doing this follow the instructions in this manual to 
set the machine’s functions. 

 

1.4 Applications 

The CD-2800 Ultrasonic Cleaner can be used to clean the following: 
jewelry, eyeglasses, sunglasses, keys, gold, diamonds, silverware, 
precious coins, metal badges, metal watchbands, waterproof watches, 
shaver heads, razor blades, dentures, combs, toothbrushes, valves, 

nozzles, machine parts, printer heads, and other valuables! 

Do not fully 

submerge non-waterproof items such as watches. Studs and jewels or 
any parts that are not firmly set in the item may fall off during cleaning.

 

1.5 Operating Instructions 

1. If you are cleaning a watch band please see the instructions 

under section 1.5 #4 for special instructions before proceeding 
with the steps listed below. 

2. Make sure the unit is unplugged. Open the cover and put the 

article into the tank then fill it with water. There should be 
enough water to completely submerge the article, but the water 
should be no higher than the fill line on the inside of the 
machine. 

Do not run the unit without water as it may cause the 

unit to become damaged. Do not add to much water or let the 
water overflow.

 

3. Close the cover and plug the unit in. The blue power indication 

light on the inner cover will turn on. 

4. Turn the unit on to start the cleaning process. When the 

cleaning is in progress the red working indication light will turn 
on. 

The tank will make a slight buzzing noise when it is 

running; do not be alarmed, this is normal.

 

5. After 3 minutes the cleaning will stop automatically and the red 

working indication light will turn off. The interval will be more 
effective if longer than 5 minutes. You may also press the off 
button to stop the cleaning at any point during the process. If 
you wish to run the cycle again simply repeat the above steps 
as many times as desired. Repeating the working cycle will 
enhance the cleaning effect.  

6. When the cleaning is over, unplug the machine, open the 

cover, take the cleaned article out, and drain the water. 

1.6 Cleaning Methods 

1. General Cleaning: All you need is tap water to clean most 

items. There should be enough water to completely submerge 
the article but the water should be no higher than the fill line on 
the inside of the machine. 

2. Enhanced Cleaning: Ideal for professional use by professional 

jewelers, opticians, collectors, dental labs, dentists, and artists. 
Add the Blitz Gem & Jewelry Cleaner Concentrate (not 
included in all packages) for a brighter shine. To clean items 
that are smudged or smeared add a few drops of detergent to 
the water to enhance the cleaning effect. 

3. Partial Cleaning: When cleaning large items that do not fit in 

the tank you will only be able to partially submerge them/ clean 
them. 

4. Cleaning Watch Bands: To clean a watchband on a non-

waterproof watch please use the included plastic arc so the 
watch head does not get damaged in the process. Slide the 
watch band around the plastic arc. Fill the tank with water no 
higher than the fill line so that the watch head remains above 
the water. Slowly submerge the watch band into the tank 
making sure the face remains above water. Add cleaner and 
run the cycle following the instructions in section 1.4 above. 

1.7 Maintenance 

1. Do not leave the item you are cleaning in the tank when 

pouring in cleaning solution. 

2. Before draining the water unplug the unit. 
3. Empty the water from the tank immediately after each use. 
4. Wipe the tank with a soft towel to dry. 

Do not

 fully submerge 

the machine in water to clean it. Wash with a slightly damp 
cloth when necessary.  

5. 

Do not

 clean the unit with organic solvents, diluents, or 

abrasives. 

6.  Store in a cool and dry place. 
7. All repairs should be performed by an authorized service 

center. Never try to fix the unit yourself. 

1.8 Specifications 

Name 

Ultrasonic Cleaner 

Power Supply 

AC 110-120V 
60HZ 

Item No. 

CD-2800 

Input Power 

35W 

DIM. 

20x12.5x14cm 

Timer Setting 

3 minutes 

Tank Size 

600ml 

WT 

780 g 

 

CD-2800 Ultrasonic Cleaner 

 
 

 
 

Us

er’s Manual 

Reviews: