![background image](http://html.mh-extra.com/html/erco/dali/dali_mounting-instructions_2421766001.webp)
3000053405
0219
E
ERCO GmbH
Postfach 2460
58505 Lüdenscheid
Brockhauser Weg 80-82
58507 Lüdenscheid
Germany
Tel.: +49 2351 551 0
Fax: +49 2351 551 300
www.erco.com
DA
DA
L3
N
a
Live end right
a
left
right
left
right
inside
outside
a
outline top view:
1
DALI connector
Mounting instructions
1
English
Read the instructions carefully
before installation and com-
missioning!
Leave the instructions for
users/customers for future
reference!
Our updated product documen-
tation can be accessed at
www.erco.com/download.
General safety information
Warning!
Risk of electric shock!
Prior to maintenance, cleaning and
installation work, disconnect mains
cables and existing DALI control lines
and check the power is switched-off.
Attention!
- The electrical contractor has responsi-
bility for ensuring the electrical, mecha-
nical and thermal compatibility between
the track connector and track system.
- With DALI installations only DALI con-
nectors must be used.
- Installation requires specialist electri-
cal knowledge and must only be carried
out by an approved specialist.
- All cables, materials and devices used
must be suitable for mains voltage, as
the DALI signal is not transmitted using
safety extra low voltage (SELV).
- Mark the track as DALI track with the
included clips (fig. 4).
- For general information on DALI,
please go to:
www.digitalillumination interface.org.
- When installing, always observe the
national installation and accident pre-
vention regulations.
- When installation is complete, check
the function of the protective conduc-
tor on the track.