Ensa-Rs1 Ensa 2 Channel Remote Switch 1.3
ENSA-RS1 - 2 Channel Remote Switch
Thank you for choosing the ENSA-RS1 2 Channel Remote Switch Sensor!
The ENSA-RS1 is a 2 channel remote switch capable of switching on and off 240V AC
electrical devices using the onboard relays. This receiver includes 2x Pre-Programmed
remotes, which are ready to use. Additional remotes can be purchased separately. The
2 channels of this receiver are able to be programmed as either latching, or timed (up
to 4 minutes).
Specifications:
AC Input: 220~240VAC
AC Output: 220~240VAC
Power Frequency: 50Hz
Max Load: 5 Amp’s Total
Operating Feq: 433MHz
Range: 100 Meters line of site
Dimensions: 115 x 100 x 60mm
IP Rating: IP55
There are many ways how you may use the ENSA-RS1 2 Channel Receiver, below are
some examples.
1.
Using the ENSA-RS1 as a 2 channel remote switch
This Remote Switch that can used to remotely turn on and off 240V AC Electrical devices such as
lights, fans, sirens etc. with the included remotes or via hardwired contacts wired to PZ1 and PZ2.
Either output can be programmed as latching or timed mode (maximum 5 minutes).
2.
Using the ENSA-RS1 with the Wireless universal transmitter
