- 01-
-03-
-02-
FEATURE
ZWN-BPC
SPECIFICATIONS
PIR Motion Sensor
INSTALLATION INSTRUCTIONS
Ceiling Mounted
Power Supply....................................................................2AA batteries
RF Range...................................................Up to 100 feet line of sight
Z-Wave Frequency..................................................... 908.42MHz(US)
Operation Temperature...........................................................32-104°F
DESCRIPTION
Adopt wireless RF technology
Support Z-Wave associations, sending commands up to 5
Place of PIR Motion Sensor:
It is very important to place the sensor with 6-7 feet from the primary
location, at least 8 feet away from the possible false triggering area.
Hotel Room :
Private Office :
8 to 9 feet
At least 2 feet
8 to 9 feet
7 feet
Air Vent
Bath Room
At least 8 feet
Air-conditioner
Sitting Spot, a Chair or a Coach
PIR Motion Sensor
At least 7 feet
6-7 feet
6-7 feet
PLACEMENT
INSTALLATION
1.The PIR Motion Sensor consists of two parts: Attachment Base and
2.Place Attachment Base on ceiling by using both screws and adhesive
3.Insert the two AA batteries noting the proper orientation.
4.Lock the Motion Sensor by twisting onto the base.
Motion Sensor.
pad.
Ceiling
Adhesive Pad
Attachment Base
Motion Sensor
Screw
The PIR Motion Sensor ZWN-BPC is a Z-Wave enabled device and is
This sensor acts as a security device by detecting changes in infrared
fully compatible with other Z-Wave certified device. This device is
typically used in conjunction with the ZWN-BDS to monitor the
environment and provide hand-free lighting control, it can also trigger
radiation levels. when some body moves within or across the detection
of coverage, one triggering signal will be transmitted to associated
PIR Sensitivity Adjustment....................................25%/50%/75%/100%
PIR Detection Coverage..................................................... Up to 600ft
2
The ZWN-BPC provides a 360° coverage pattern, up to 600 square
feet. The coverage shown represents walking motion at a mounting
height of 8 feet( See Figure 1 ). For building spaces with lower levels
and barriers, coverage size may decrease.
26ft
8m
8 ft
13 ft 13 ft
7 ft
7 ft
3 ft 0
3 ft
Typical
desk-top
level
Figure 1
of activity or with obstacles
Adjustable PIR Sensitivity
Test Mode...................................................................................15 sec.
LED motion indicator
PIR Motion Sensor
ADJUSTMENT
Adjustable: 25%/50%/75%/100%
Sensor Sensitivity Range
Program Button
Figure 2
Figure 3
Figure 4
COVERAGE PATTERN
DIP Switch
DIP Switch
PIR Sensitivity
25%
50%
75%
100%
associated Z-Wave devices
a Z-Wave enabled alarm when motion is detected.
Z-Wave devices.
360 degree ceiling mounted cover up to 600ft
2
For indoor use only
Low battery detection
