background image

WFWL  20180615 

LS9 0SE

Wall Light Instruction Manual

• 

This product is only suitable for connection to a 240V~50Hz supply in accordance 

with current IEE wiring regulations, and should be installed in accordance with 

local building regulations. It is for domestic, indoor use only, and is not suitable for 

a bathroom location.

• 

The product should be connected to a lighting circuit protected by a 5 amp fuse 

(or a 6 amp miniature circuit breaker).

• 

Before installing your product always switch off the mains supply, and remove the 

appropriate fuse or switch off the appropriate circuit breaker before commencing 

installation. Ensure that no one else has access that would enable the supply to be 

inadvertently reconnected.

• 

If the Class II, Double Insulated symbol 

 is on the product, then it does NOT 

require an Earth, and Live or Neutral must not be connected to Earth. If there is 

no such symbol, the product must be Earthed. The terminal blocks are supplied 

according to requirements of the fitting.

• Never fit bulbs of a higher wattage than those specified on the label, as these may 

cause overheating and damage the fitting.

• If there is a “Minimum Distance” label, do not allow flammable materials to rest 

within that distance from the lamps.

• 

If the product must not be mounted on combustible surfaces there will be the 

below symbol on it. If there is no symbol then the product may be mounted on any 

wall surface, including combustible ones.

• 

This product may contain delicate parts – be careful during handling and 

maintenance to avoid breakage.

• If  you  are  in  any  doubt  about  your  competence  please  consult  a  qualified 

electrician. 

• If  any  modification  is  made  it  will  invalidate  the  warranty  and  may  render  the 

product unsafe.

Safety Warnings

Minimum Distance symbol:

“Do not mount on flammable surfaces” 

symbol:

0.5m

Reviews: