background image

High performance 
industrial HFO 
viscosity meter

High performance 
viscosity sensor

High performance 
viscosity meter 
kits

7827

Product Data Sheet

 

PS-001217, Rev. 

April

 201

3

Micro Motion

®

 7827 Digital Viscosity Meter

Micro Motion

®

 viscosity meters are built to tackle the most demanding 

process and control applications. Rugged and reliable direct insertion meters 
with very low maintenance, they provide fully integrated “fit and forget” 
viscosity measurement.

High accuracy viscosity and density measurement

Multi-variable measurement of viscosity, density and temperature

Unique direct insertion design in lengths up to 13 ft (4 m)

Viscosity measurement up to 20,000 cP

Greatest installation flexibility

Continuous, real-time measurement in pipelines, slipstreams and
tanks

Superior diagnostics and parameter calculations including referred
viscosity and viscosity index

Comprehensive communications and control capability

Superior reliability and safety

Optimized design – insensitive to vibration, temperature, and
pressure variations

7827 / 7829

7829

Visconic

High performance 
marine and power 
HFO viscosity 
meter

7829

Viscomaster

Summary of Contents for Micro Motion 7827

















Reviews: