LAN CABLETESTER
46
INSTRUCTION
MANUAL
TEST
ftnF
m
1
I.
INTRODUCTION
The LAN Cable Tester is an easy and effective cable tester with
the ability to identify cable failures, check wiring, and measure
cable length in the UTP (Unshielded twisted pair cable), FTP
(Foil – screened (shielded twisted pair cable) cables, and COAX
(coaxial cable) cables.
It not only identifies wiring faults, such as open wires,
shorted wires, miswires and split pairs, but also tests up
to 8 different cables at one end. A stored cable library
provides quick access to common cable types.
U.S. Pat. No. Des. 446,135
The Cable Tester comes with :
One remote identifier #1
RID46-234 (Optional for #2, #3 & #4)
RID46-5678 (Optional for #5, #6, #7 & #8 )
One patch cable RJ-45 to RJ-45 30 cm long.
RJ45-RJ45 female coupler/connector.
Instruction manual.
Carrying case & 6 pcs “AAA” 1.5V Battery.
CAUTION
The tester only connects to inactive cables. The input is
protected to withstand low voltages, prolonged connection to
active telephone lines and networks may damage the tester.
http://www.elso.sk/product.php?id_product=2373
II.
PRODUCT PROFILE
