06112020
-00182
1
WhiteBoardScreen
TE CLR
®
2 Series
Ceiling Ambient Light Rejecting
Dry-Erase
Whiteboard Projector Screen
Model# WB4x8-CLR 2
User’s Guide
Thank you for choosing the
WhiteBoardScreen TE (Thin Edge)
Series dry-erase whiteboard projection screen!
The CLR
®
2 model features ceiling ambient light rejecting technology to be used with tabletop-mounted
ultra/short-throw projectors for rooms with uncontrolled lighting.
In addition to being a projector screens, it double as a dry-erase whiteboard that is scratch-resistant and easy to
clean. Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure
a long product life.
Precautionary Notes:
Before using the dry-erase function of your whiteboard screen, please make note of the following instructions to
properly maintain and clean your dry-erase/projection screen.
These Whiteboard cleaning tips are just as
relevant with any dry-erase writing surface as they are with our Whiteboard- Projection Screens.
1. Only use a
high-density foam eraser
when removing dry-erase markings from the WhiteBoardScreen.
2.
Do not
use abrasive erasers as these may damage the surface of the screen and will not erase dry-erase pen
markings on the whiteboard screen surface.
3.
Never
spray the whiteboard cleaning solution onto the surface while marker writing is present and then attempt
to use a high-density foam eraser to remove. This will only smear the dry-erase marker ink making the surface
more difficult to clean and will likely ruin the foam eraser.
4. If there are any dry-erase markings left behind even after attempting to remove them using the high density
eraser, spray our whiteboard cleaning solution directly onto the screen surface and use only a soft microfiber
cloth to wipe-down and clean the area.
