background image

document version: 1.0.0 - English

Instruction manual

Models: Toadi & Toadi Pro 

European instruction manual 

WARNING 

Read Instruction Manual thoroughly before use and follow all safety 
precautions – improper use can cause serious or fatal injury. 

This appliance can be used by children aged from 8 years and above and persons with 
reduced physical, sensory or mental capabilities or lack of experience and knowledge if 
they have been given supervision or instruction concerning use of the appliance in a safe 
way and understand the hazards involved. Children shall not play with the appliance. 
Cleaning and user maintenance shall not be made by children without supervision.

This appliance is not intended for use by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they 
have been given supervision or instruction concerning use of the appliance by a person 
responsible for their safety. 

Children should be supervised to ensure that they do not play with the appliance during 
mowing or while the mowing motor is activate.

The Toadi Order BV, Belgium

Original Instruction

Page   of 

1

47

Summary of Contents for Toadi
















































Reviews: