background image

920-0388-00 Rev. G

Page 1 of 6

Specifications:

Weight: 

   1.7 

lbs. 

approx.

   

Output Power (Lumens):    

650 raw/600 effective lm ±50  

    lm 

 

            

IMPORTANT!

 Read all instructions before installing and using. Installer: This manual must be

delivered to the end user.  ECCO is not responsible for the misuse of our work light products by un-

authorized personnel.

Do not install and/or operate this safety product unless you have read and understand the safety 

information contained in this manual.

1.  Proper installation combined with operator training in the installation, use, care and maintenance of vehicle equipment accessories is

     essential to ensure the safety of you and those you are trying to protect.

2.  Exercise caution when working with live electrical connections.

3.  Proper placement and installation are vital to the performance of this worklamp. Install this product so that output

     performance of the system is maximized and the controls are placed within convenient reach of the operator so that s/he can

     operate the system without losing eye contact with the work area.

4.  It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use, the

     vehicle operator should ensure the projection of the beam is not blocked by vehicle components (i.e., open trunks

     or compartment doors), people, vehicles, or other obstructions.

5.  The manufacturer assumes no liability for any loss resulting from the use of this device. 

            

         

WARNING!

 

Failure to install or use this product according to manufacturer’s recommendations may result in property

damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!  

!

Featuring a high intensity flood beam and three operating modes 

(100% intensity, 30% intensity & SOS flashing) this heavy duty 

battery powered worklamp combines mobility with high performance 

and a compact design. The long-life, lithium rechargeable battery 

allows the worklamp to be operated for 3-4 hours before recharging 

is required. Dual color CA & CR models feature five operating 

modes (100% intensity white, 30% intensity white, 100% intensity 

amber or red, double flash amber or red and quad flash amber or 

red) A cigarette socket charging lead is supplied with all models. 

Select models are supplied with an AC adapter (also available as an 

accessory).

SAA     

NOTE: Black die cast Aluminum housing gets very hot to the touch after operating constantly for several hours.

Prior to use:

1. Fully charge the battery for 7.5 hours before first use.

2. The battery should be charged at least once every three months

    when not in regular use.

3. The red light indicates the unit is charging; the green light 

    indicates that the unit is fully charged.

4. Only use the charger provided with this unit. 

    

WARNING: INTENDED FOR USE ON STATIONARY VEHICLES     

    ONLY. REMOVE AND STORE WHEN VEHICLE IS IN MOTION.

Installation Instructions:

1. Mount the unit on a flat, clean, dry surface.

EW2461 LED Magnet Mount Worklamp

WARNING!  

Risk of fire and burns.  Do not open, crush, expose to heat above 120°F(50°C), incinerate or short terminals.  Do not store, use 

or charge in locations that may reach or exceed 120°F(50°C).  Never charge while unattended.  Do not expose battery to water or liquids.  Follow 

manufacturer’s instructions.

Reviews: