2.4G optical Mouse user manual
Feature
2.4G wireless transmission technology
，
work distance is about
5-7
meters.
Optical chipset
，
cursor position more accurate, performance more stable
1000/1250/
1750CPI adjusted
，
change any speed as you like
Nano Transceiver snaps into the bottom of the mouse.
Operation
1
，
Take mouse and receiver from the package
2. Please put the two pieces AAA batteries into battery cassette in correct polarities
3
，
Turn on the mouse, LED indicator light will flashing a few seconds
4
，
Put the Nano receiver into USB port of PC
，
then you can use mouse freely
Exclusive Function:
1
，
Low battery remind function
While you using your mouse, if the low power indicator light flickers, it shows batteries
are drains up or empty, you should change new batteries at once.
Only valid for AAA alkaline dry battery
2
，
Automatic sleeping function
The mouse will power off automatically if you don’t use it for 8 minutes, just press any
key or scroll the wheel to wake up the mouse. Please turn off it when you go outside or
don’t use it for a long time.
3
，
CPI adjusted function
1000/1250
/1750 adjusted, default resolution is
1250
CPI. You can press CPI switching
button to change speed.
4
，
Nano Transceiver snaps into the bottom of the mouse
It has a super mini nano receiver, you can put it into the usb connect of pc or notebook, it
will not infect your computer at all, if you want to take it outside, you can put it into the
bottom of your mouse.
Reset
It has the ID memory function automatical, please reconnect ID if you lost the
memory code. High magnetic field and libration will lead to these two distinguish
code disappear. you need reset it.
1
，
Reconnect the receiver
2
，
Press the reset switch in the bottom of mouse.
3
，
Then you can use it if the indicator light flickers
Note
1. This mouse uses optical light as transfer checking, it comply with correlative safe
prescript, please do not look into the bottom of the mouse directly.
