![background image](http://html.mh-extra.com/html/dynamite/prophet-p1-mini/prophet-p1-mini_instruction-manual_2548302001.webp)
3
Included Items
AC Power Cord
Charge Adapter: Banana to EC3™ Device (DYNC0072)
Optional Items
Temperature Sensor (DYN5033)
Dynamite
®
LiPo Charge Bag: small (DYN1400), large (DYN1405)
Specifications
Input Voltage 100–240V AC (50–60Hz); 11–18V DC
Charging Capability 2–4S Li-Po/Li-Ion/Li-Fe;
6–8C Ni-Cd/Ni-MH; 2–12V Pb
Battery Capacities 100–50000 mAh
Charge Current 0.1A–6A (in 0.1A Increments/60W max)
Discharge Current 0.10A–2.0A (in 0.1A Increments/10W max)
Balance Current 200mA max
Charging Mode Ni-Cd/Ni-MH: Peak; Li-Po/Li-Ion/Li-Fe/Pb: CC/CV
Protection Short-circuit, over-current, reverse polarity, low input voltage,
over-temperature
CAUTION:
Before charging, always ensure you have chosen the correct battery chemistry
type for the battery you are charging.
1. Press
ENTER / Start
button to confirm you have read the manual and access the
charger functions.
2. Press the
Batt / PROG Stop
button to access the root menu. Press the
DEC
or
INC
button to scroll through the main menu screens.
3. Press
ENTER / Start
to make a selection.
4. Press the
DEC
or
INC
button to scroll through the program options.
5. Press
ENTER / Start
to select a program option.
6. Press the
DEC
or
INC
Button to change the parameter. Press the
ENTER / Start
Button again to move to the next parameter.
7. Once the parameters are at the desired settings, press and hold the
ENTER /
Start
Button for 3 seconds.
8. Press the
Batt / PROG Stop
Button at any time to stop charging.
LI** (LI-PO/LI-FE/LI-ION) LITHIUM CHARGING
LI** (LI-PO/LI-FE/LI-ION) LITHIUM STORAGE CHARGING
LI** (LI-PO/LI-FE/LI-ION) LITHIUM DISCHARGING
1. Connect the AC power cord to the charger
AC Power Input Port.
2. Connect the AC power cord to the AC power source.
3. When the charger is powered ON, a message will appear on the
LCD Screen
.
CONNECTING BATTERIES TO THE CHARGER:
CAUTION:
Always power ON the charger before connecting a battery, or damage to the
charger and the battery can result.
1. Connect the charger to the power source.
2. Select the charging settings.
3. Connect the banana plugs of the battery adapter cable to the Power Output, making sure that
the positive and negative connectors are not reversed.
4. Connect the battery connector to the battery adapter cable.
5. Start battery charging.
CAUTION:
If at any time during the charge process the battery pack becomes hot or begins to puff, disconnect the battery immediately and discontinue the charge process as batteries can
cause fire, collateral damage and injuries.
CAUTION:
Using a charge rate that is not compatible with the battery capacity may result in damage or malfunction of the charger or battery.
CAUTION:
The Lithium charge program menus are to be used ONLY for the charging and discharging of Lithium battery packs. Charging other battery types using the Lithium charge
programs will damage the battery or the charger.
Not to scale.
Not all wiring shown.
Not all connectors shown.
A.
AC Power input Port
B.
LCD Screen
C.
Batt / PROG Stop
D.
DEC (decrease)
E.
INC (increase)
F.
ENTER / Start
G.
Balance Board Connector
H.
Charge Port
I.
Temperature Sensor Port
J.
USB/PC Link Port
K.
Battery Adapter Cable
1. Connect the banana plugs of the battery adapter cable to the charge port
(H,L)
. Confirm the
positive and negative connectors match, red to red (positive to positive) and black to black
(negative to negative).
2. Connect the Balance Adapter Board to the Balance Port
of the charge port
(G,K)
.
3. Connect the battery connector to the battery adapter cable.
4. Connect the balance connector of the battery to the balance adapter.
5. Press the
Batt / PROG Stop
button to access the root menu. Press the
DEC
or
INC
button to
scroll through the main menu screens until you reach Program Select=Li-Po/Li-Ion/Li-Fe.
6. Press
ENTER / Start
7. Press the
DEC
or
INC
Button to scroll through the program options (Charge, Balance Charge,
Storage, Discharge).
8. Press
ENTER / Start
to select a program option.
9. Press the
DEC
or
INC
Button to change the parameter. Press the
ENTER / Start
Button again
to move to the next parameter.
10. Once the parameters are at the desired settings, press and hold the
ENTER / Start
Button for
3 seconds. Press
ENTER / Start
again to confirm and start the charge process.
11. The charger will check the battery and charger settings and charging will begin. The charger
will beep and display the following screen:
12. Press the
DEC
Button to see the rest of the Charging information.
13. Press the
INC
Button to see the voltages for each cell. Press
ENTER / Start
to return to the
charging screen.
14. Press the
Batt / PROG Stop
Button at any time to stop charging.
15. When charging is complete, the charger will sound a series of beeps.
16. Disconnect the battery from the charger when the charge is complete.
1. Connect the banana plugs of the battery adapter cable to the charge port
(H,L)
. Confirm the
positive and negative connectors match, red to red (positive to positive) and black to black
(negative to negative).
2. Connect the Balance Adapter Board to the Balance Port
of the charge port
(G,K)
.
3. Connect the battery connector to the battery adapter cable.
4. Connect the balance connector of the battery to the balance adapter.
5. Press the
Batt / PROG Stop
button to access the root menu. Press the
DEC
or
INC
button to
scroll through the main menu screens until you reach Program Select=Li-Po/Li-Ion/Li-Fe.
6. Press the
ENTER / Start
Button.
7. The
DEC
or
INC
Button until Li-Po/Li-Ion/Li-Fe STORAGE appears.
8. Press the
ENTER / Start
Button to edit the parameter.
9. Once the parameters are at the desired settings, press and hold the
ENTER / Start
Button for
3 seconds. Press
ENTER / Start
again to confirm and start the process.
10. The charger will check the battery and charger settings and storage charging will begin.
11. Press the
DEC
or
INC
Button to see the rest of the storage charging information.
12. Press
Batt / PROG Stop
at any time to stop charging.
13. When the storage process is complete, the charger will sound a series of beeps.
14. Disconnect the battery from the charger when the storage process is complete.
1. Connect the banana plugs of the battery adapter cable to the charge port
(H,L)
. Confirm the
positive and negative connectors match, red to red (positive to positive) and black to black
(negative to negative).
2. Connect the Balance Port to the
Balance Circuit Adapter Board
(G,K)
.
3. Connect the battery connector to the battery adapter cable.
4. Connect the balance connector of the battery to the Balance Adapter Board.
5. Press the
Batt / PROG Stop
button to access the root menu. Press the
DEC
or
INC
button to
scroll through the main menu screens until you reach Program Select=Li-Po/Li-Ion/Li-Fe.
6. Press
the ENTER / Start
Button.
7. the
DEC
or
INC
Button until Li-Po/Li-Ion/Li-Fe DCHG appears.
8. Press the
ENTER / Start
Button to edit the parameter.
9. Once the parameters are at the desired settings, press and hold
the ENTER / Start
Button for
3 seconds.
10. The charger will check the battery and charger settings and discharging will begin.
11. Press the
DEC
or
INC
Button to see the rest of the Discharging information.
12. Press
Batt / PROG Stop
at any time to stop discharging.
13. When discharging is complete, the charger will sound a series of beeps.
14. Disconnect the battery from the charger when the discharge is complete.
4.20 4.20 4.20
0.00 0.00 0.00
POWER UP SCREEN
When the charger is powered ON, there is a series of self tests and the charger will require the
user to verify they have read the manual by pressing the
ENTER / Start
button. The charger will
not proceed with charge functions until this process is completed.
LI-PO/LI-ION/LI-FE/LI-HV ARE SHOWN AS LI**.
MENUS DIFFER ONLY IN CELL AND PACK VOLTAGE VALUES.
GETTING STARTED
PROGRAMMING QUICK START GUIDE
OPERATING YOUR CHARGER
© 2018 Horizon Hobby, LLC. Dynamite, Prophet , EC3 and the Horizon Hobby Logo are trademarks or registered trademarks of Horizon Hobby, LLC.
All other trademarks, service marks and logos are property of their respective owners.
NOTICE:
This appliance is not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
DANGER:
To reduce the risk of fire or electric shock, carefully follow these instructions.
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole
discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and
click on the support tab for this product.
MEANING OF SPECIAL LANGUAGE
The following terms are used throughout the product literature to indicate various levels of
potential harm when operating this product:
WARNING:
Procedures, which if not properly followed, create the probability of property
damage, collateral damage, and serious injury OR create a high probability of superficial injury.
CAUTION:
Procedures, which if not properly followed, create the probability of physical property
damage AND possibility of serious injury.
NOTICE:
Procedures, which if not properly followed, create a possibility of physical property
damage AND little or no possibility of injury.
WARNING:
Read the ENTIRE instruction manual to become familiar with the features of
the product before operating. Failure to operate the product correctly can result in
damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and
requires some basic mechanical ability. Failure to operate this Product in a safe and responsible
manner could result in injury or damage to the product or other property. This product is not
intended for use by children without direct adult supervision. Do not attempt disassembly, use
with INCompatible components or augment product in any way without the approval of Horizon
Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is
essential to read and follow all the instructions and warnings in the manual, prior to assembly,
setup or use, in order to operate correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
CAUTION:
Always ensure the battery you are charging meets the specifications of this
charger and that the charger settings are correct. Not doing so can result in excessive
heat and other related product malfunctions, which can lead to user injury or property damage.
Please contact Horizon Hobby or an authorized retailer with compatibility questions.
WARNING:
Never leave charger unattended, exceed maximum charge rate, charge with
non-approved batteries or charge batteries in the wrong mode. Failure to comply may
result in excessive heat, fire and serious injury.
CHARGING WARNINGS
• NEVER LEAVE CHARGING BATTERIES UNATTENDED DURING USE.
• NEVER CHARGE BATTERIES OVERNIGHT.
• Never attempt to charge dead, damaged or wet battery packs.
• Never attempt to charge a battery pack containing different types of batteries.
• Never allow children under 14 years of age to charge battery packs.
• Never charge batteries in extremely hot or cold places or place in direct sunlight.
• Never charge a battery if the cable has been pinched or shorted.
• Never connect the charger if the power cable has been pinched or shorted.
• Never connect the charger to an automobile 12V battery while the vehicle is running.
• Never attempt to dismantle the charger or use a damaged charger.
• Never attach your charger to both an AC and a DC power source at the same time.
• Never connect the input jack (DC input) to AC power.
• Always use only rechargeable batteries designed for use with this type of charger in the correct
programming mode.
• Always inspect the battery before charging.
• Always keep the battery away from any material that could be affected by heat.
• Always monitor the charging area and have a fire extinguisher available at all times.
• Always end the charging process if the battery becomes hot to the touch or starts to change
form (swell) during the charge process.
• Always connect the charge cable to the charger first, then connect the battery to avoid short
circuit between the charge leads. Reverse the sequence when disconnecting.
• Always connect the positive red leads (+) and negative black leads (–) correctly.
• Always disconnect the battery after charging, and let the charger cool between charges.
• Always charge in a well-ventilated area.
• Always terminate all processes and contact Horizon Hobby if the product malfunctions.
• Charge only rechargeable batteries. Charging non-rechargeable batteries may cause the
batteries to burst, resulting in injury to persons and/or damage to property.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
WARNING:
Failure to exercise caution while using this product and comply with the
following warnings could result in product malfunction, electrical issues, excessive heat,
FIRE, and ultimately injury and property damage.
Prophet
™
P1 Mini AC Battery Charger
Instruction Manual | Bedienungsanleitung | Manuel d’utilisation | Manuale di Istruzioni
DYNC3015
Li** DCHG 3.0V
1.0A 9.0V(3S)
Li** BAL-CHG 3S
C= 3200mAh 3.2A
BATT/PROGRAM
Li**
BATT
Li** CHARGE
2.0A 14.8V (4S)
BATT/PROGRAM
Ni**
BATT
Ni** CHARGE
CURRENT 2.0A
Ni** Auto CHARGE
CURRENT 3.0A
Ni** DISCHARGE
1.0A CUT: 3.2V
Li** FAST CHG
2.0A 14.8V (4S)
Li** STORAGE
2.0A 14.8V (4S)
Li** DISCHARGE
1.0A 14.8V (4S)
Ni** RE-PEAK
1
Ni** CYCLE
CHG>DCHG 1
BATT/PROGRAM
SYSTEM SETTING->
Saftety Timer
ON
120Min
Capacity Cut-Off
ON
5000mAh
Temp Cut-Off
On
50C 122F
Temperature Unit
Celcius
Rest Time
CHG>DCHG 10Min
NiMH Sensitivity
D.Peak
4mV
Key Beep ON
Buzzer
ON
Bal. Connection
ON
Load Factory Set
Enter
Version
HW:1.00 SW:1.03
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
BATT/PROGRAM
Pb BATT
0.00 0.00 0.00 V
0.00
V
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT METER
BATTERY CHECK
...................
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT RESISTANCE
NiCd Sensitivity
D.Peak
4mV
BATT/PROGRAM
BATT MEMORY
[ BATT MEMORY X ]
ENTER SET->
LiPo
BATT TYPE
BATT VOLTAGE
14.8V(4S)
CHARGE CURRENT
2.0A
DISCHRG CURRENT
1.0A
DISCHG VOLTAGE
3.0V/CELL
4.20V
TVC=YOUR RISK!
SAVE PROGRAM
ENTER
DYNAMITE P1 MINI
DYNC3015
READ THE MANUAL?
PRESS>TO CONFIRM
BATT/PROGRAM
Li**
BATT
Li** CHARGE
2.0A 14.8V (4S)
BATT/PROGRAM
Ni**
BATT
Ni** CHARGE
CURRENT 2.0A
Ni** Auto CHARGE
CURRENT 3.0A
Ni** DISCHARGE
1.0A CUT: 3.2V
Li** FAST CHG
2.0A 14.8V (4S)
Li** STORAGE
2.0A 14.8V (4S)
Li** DISCHARGE
1.0A 14.8V (4S)
Ni** RE-PEAK
1
Ni** CYCLE
CHG>DCHG 1
BATT/PROGRAM
SYSTEM SETTING->
Saftety Timer
ON
120Min
Capacity Cut-Off
ON
5000mAh
Temp Cut-Off
On
50C 122F
Temperature Unit
Celcius
Rest Time
CHG>DCHG 10Min
NiMH Sensitivity
D.Peak
4mV
Key Beep ON
Buzzer
ON
Bal. Connection
ON
Load Factory Set
Enter
Version
HW:1.00 SW:1.03
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
BATT/PROGRAM
Pb BATT
0.00 0.00 0.00 V
0.00
V
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT METER
BATTERY CHECK
...................
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT RESISTANCE
NiCd Sensitivity
D.Peak
4mV
BATT/PROGRAM
BATT MEMORY
[ BATT MEMORY X ]
ENTER SET->
LiPo
BATT TYPE
BATT VOLTAGE
14.8V(4S)
CHARGE CURRENT
2.0A
DISCHRG CURRENT
1.0A
DISCHG VOLTAGE
3.0V/CELL
4.20V
TVC=YOUR RISK!
SAVE PROGRAM
ENTER
DYNAMITE P1 MINI
DYNC3015
READ THE MANUAL?
PRESS>TO CONFIRM
BATT/PROGRAM
Li**
BATT
Li** CHARGE
2.0A 14.8V (4S)
BATT/PROGRAM
Ni**
BATT
Ni** CHARGE
CURRENT 2.0A
Ni** Auto CHARGE
CURRENT 3.0A
Ni** DISCHARGE
1.0A CUT: 3.2V
Li** FAST CHG
2.0A 14.8V (4S)
Li** STORAGE
2.0A 14.8V (4S)
Li** DISCHARGE
1.0A 14.8V (4S)
Ni** RE-PEAK
1
Ni** CYCLE
CHG>DCHG 1
BATT/PROGRAM
SYSTEM SETTING->
Saftety Timer
ON
120Min
Capacity Cut-Off
ON
5000mAh
Temp Cut-Off
On
50C 122F
Temperature Unit
Celcius
Rest Time
CHG>DCHG 10Min
NiMH Sensitivity
D.Peak
4mV
Key Beep ON
Buzzer
ON
Bal. Connection
ON
Load Factory Set
Enter
Version
HW:1.00 SW:1.03
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
BATT/PROGRAM
Pb BATT
0.00 0.00 0.00 V
0.00
V
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT METER
BATTERY CHECK
...................
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT RESISTANCE
NiCd Sensitivity
D.Peak
4mV
BATT/PROGRAM
BATT MEMORY
[ BATT MEMORY X ]
ENTER SET->
LiPo
BATT TYPE
BATT VOLTAGE
14.8V(4S)
CHARGE CURRENT
2.0A
DISCHRG CURRENT
1.0A
DISCHG VOLTAGE
3.0V/CELL
4.20V
TVC=YOUR RISK!
SAVE PROGRAM
ENTER
DYNAMITE P1 MINI
DYNC3015
READ THE MANUAL?
PRESS>TO CONFIRM
BATT/PROGRAM
Li**
BATT
Li** CHARGE
2.0A 14.8V (4S)
BATT/PROGRAM
Ni**
BATT
Ni** CHARGE
CURRENT 2.0A
Ni** Auto CHARGE
CURRENT 3.0A
Ni** DISCHARGE
1.0A CUT: 3.2V
Li** FAST CHG
2.0A 14.8V (4S)
Li** STORAGE
2.0A 14.8V (4S)
Li** DISCHARGE
1.0A 14.8V (4S)
Ni** RE-PEAK
1
Ni** CYCLE
CHG>DCHG 1
BATT/PROGRAM
SYSTEM SETTING->
Saftety Timer
ON
120Min
Capacity Cut-Off
ON
5000mAh
Temp Cut-Off
On
50C 122F
Temperature Unit
Celcius
Rest Time
CHG>DCHG 10Min
NiMH Sensitivity
D.Peak
4mV
Key Beep ON
Buzzer
ON
Bal. Connection
ON
Load Factory Set
Enter
Version
HW:1.00 SW:1.03
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
BATT/PROGRAM
Pb BATT
0.00 0.00 0.00 V
0.00
V
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT METER
BATTERY CHECK
...................
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT RESISTANCE
NiCd Sensitivity
D.Peak
4mV
BATT/PROGRAM
BATT MEMORY
[ BATT MEMORY X ]
ENTER SET->
LiPo
BATT TYPE
BATT VOLTAGE
14.8V(4S)
CHARGE CURRENT
2.0A
DISCHRG CURRENT
1.0A
DISCHG VOLTAGE
3.0V/CELL
4.20V
TVC=YOUR RISK!
SAVE PROGRAM
ENTER
DYNAMITE P1 MINI
DYNC3015
READ THE MANUAL?
PRESS>TO CONFIRM
BATT/PROGRAM
Li**
BATT
Li** CHARGE
2.0A 14.8V (4S)
BATT/PROGRAM
Ni**
BATT
Ni** CHARGE
CURRENT 2.0A
Ni** Auto CHARGE
CURRENT 3.0A
Ni** DISCHARGE
1.0A CUT: 3.2V
Li** FAST CHG
2.0A 14.8V (4S)
Li** STORAGE
2.0A 14.8V (4S)
Li** DISCHARGE
1.0A 14.8V (4S)
Ni** RE-PEAK
1
Ni** CYCLE
CHG>DCHG 1
BATT/PROGRAM
SYSTEM SETTING->
Saftety Timer
ON
120Min
Capacity Cut-Off
ON
5000mAh
Temp Cut-Off
On
50C 122F
Temperature Unit
Celcius
Rest Time
CHG>DCHG 10Min
NiMH Sensitivity
D.Peak
4mV
Key Beep ON
Buzzer
ON
Bal. Connection
ON
Load Factory Set
Enter
Version
HW:1.00 SW:1.03
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
BATT/PROGRAM
Pb BATT
0.00 0.00 0.00 V
0.00
V
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT METER
BATTERY CHECK
...................
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT RESISTANCE
NiCd Sensitivity
D.Peak
4mV
BATT/PROGRAM
BATT MEMORY
[ BATT MEMORY X ]
ENTER SET->
LiPo
BATT TYPE
BATT VOLTAGE
14.8V(4S)
CHARGE CURRENT
2.0A
DISCHRG CURRENT
1.0A
DISCHG VOLTAGE
3.0V/CELL
4.20V
TVC=YOUR RISK!
SAVE PROGRAM
ENTER
DYNAMITE P1 MINI
DYNC3015
READ THE MANUAL?
PRESS>TO CONFIRM
BATT/PROGRAM
Li**
BATT
Li** CHARGE
2.0A 14.8V (4S)
BATT/PROGRAM
Ni**
BATT
Ni** CHARGE
CURRENT 2.0A
Ni** Auto CHARGE
CURRENT 3.0A
Ni** DISCHARGE
1.0A CUT: 3.2V
Li** FAST CHG
2.0A 14.8V (4S)
Li** STORAGE
2.0A 14.8V (4S)
Li** DISCHARGE
1.0A 14.8V (4S)
Ni** RE-PEAK
1
Ni** CYCLE
CHG>DCHG 1
BATT/PROGRAM
SYSTEM SETTING->
Saftety Timer
ON
120Min
Capacity Cut-Off
ON
5000mAh
Temp Cut-Off
On
50C 122F
Temperature Unit
Celcius
Rest Time
CHG>DCHG 10Min
NiMH Sensitivity
D.Peak
4mV
Key Beep ON
Buzzer
ON
Bal. Connection
ON
Load Factory Set
Enter
Version
HW:1.00 SW:1.03
Pb CHARGE
2.0A 12.0V (6P)
Pb DISCHARGE
1.0A 12.0V (6P)
BATT/PROGRAM
Pb BATT
0.00 0.00 0.00 V
0.00
V
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT METER
BATTERY CHECK
...................
MAIN: 0.00V
H:0.00 L:0.00V
BATT/PROGRAM
BATT RESISTANCE
NiCd Sensitivity
D.Peak
4mV
BATT/PROGRAM
BATT MEMORY
[ BATT MEMORY X ]
ENTER SET->
LiPo
BATT TYPE
BATT VOLTAGE
14.8V(4S)
CHARGE CURRENT
2.0A
DISCHRG CURRENT
1.0A
DISCHG VOLTAGE
3.0V/CELL
4.20V
TVC=YOUR RISK!
SAVE PROGRAM
ENTER
DYNAMITE P1 MINI
DYNC3015
READ THE MANUAL?
PRESS>TO CONFIRM
C
D
E
F
H
G
I
B
A
J
K
WARNING:
Always use a balance connector when charging lithium batteries.
All manuals and user guides at all-guides.com
all-guides.com