background image

- 1 -

INSTALLATION INSTRUCTIONS

SA

VE FOR FUTURE USE

ROUGHING-IN DIMENSIONS: 

• For reference

RECOMMENDED TOOLS AND MATERIALS

M965555 Rev. 1.1

In the United States:

DXV by American Standard
One Centennial Avenue 
Piscataway, New Jersey 08855
Attention: Director of Customer Care

For residents of the United States, warranty 
information may also be obtained by calling 
the following toll free number: (800) 227-2734
www.DXV.com

In Canada:

DXV by American Standard
5900 Avebury Road  
Mississauga, Ontario 
L5R 3M3
Canada

Toll Free: 1-800-387-0369
Local: 905-306-1093

Fax: 1

-800-395-1498

www.DXV.ca

In Mexico:

DXV by American Standard
Via Morelos 330
Col. Santa Clara Coatitla 
Ecatepec, Estado de México 55540

Toll Free: 01-800-8391200
www.DXV.mx

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing, 

supply stores. It is essential that the tools and materials be on hand before work is begun.

Fresno

 Single Control Bar Faucet

with Pull Down Spray

Model D35403.410

Thank you for selecting DXV by American Standard.
To ensure that your installation proceeds smoothly,
please read these instructions carefully
before you begin.

Adjustable Wrench

Channel Locks

Basin Wrench

Plumbers' Putty or Caulking

Phillips Screwdriver

Regular Screwdriver

7-7/16"

(188mm)

5-5/16"

(135mm)

12-7/16"

(315mm)

6"

(153mm)

2"

(51  mm)     

28-1/2"

(723mm)

3/8" (10mm) COMPRESSION

FLEXIBLE SUPPLIES

1-3/8" to 1-1/2"

(33 to 38mm)

DIA. MOUNTING HOLE

Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2013

Summary of Contents for D35403.410






Reviews: