background image

PAGE 1

(314) 205-3033

www.diodEdynAmics.com

2013-2014 Ford mustang

RGBw

Tm

 LEd Board installation Guide

Thank you for your purchase of this unique product for your Ford 

Mustang! With these modules, you will be able to control the color 

of your factory-installed DRL LED “bars” inside the headlight. They 

are a direct replacement for the factory LED panels that illuminate 

the bars.

1. Remove the factory LED panels by unscrewing the 

screws holding the reflector housing in place and 

then unclip the wire connector.

2. Next, remove the two screws holding the LED panel 

to the reflector housing and remove the factory LED 

panel. The factory panel and driver board will no 

longer be used.

3. Place the new Diode Dynamics LED Module into 

position. Use the original screws to secure in place. 

DO NOT OVERTIGHTEN

.

WARRANTY

3 yEAR

See back for further instructions.

Tools needed: 

Screwdriver

Please note: 

Headlights must be opened before proceeding with installation. Professional installation 

is strongly recommended. Please contact Diode Dynamics if you need assistance locating an installer.

Reviews: