DIGITUS® CAT6
A
shielded
toolless plug
Instruction Manual
DN-93634
1.
Take off the cable jacket about 2 cm
2.
Put cable into IDC according
terminal T568
3.
Cut away the extra wires
4.
To insert IDC into PCB
5.
Press down both side metal housing
until the wire into the IDC pin case.
6.
The finished product.
Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping
content. If the Declaration of Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
