While battery operated:
•
If AC power is removed while the logger is on, a rechargeable battery will
provide backup for up to 20 hours.
•
The Logger will display “NO A/C” in the lower right corner of the display.
•
The display will remain on for 2 minutes and will then turn off to conserve
battery power.
•
To reactivate the display, press the On/Off button. The display will power
on, displaying the most recent data, for 2 minutes before turning the display
off. After 20 hours the logger must be powered via AC in order to turn on.
•
The logger will continue to log data while operating on battery only power
while the display is off, for up to 20 hours.
•
The logger will not sound an audible alarm when an alarm condition is
present while operating on battery power.
•
The unit must run for 24 hours before the backup battery is fully charged.
NOTE: The logger is set to wrap when full. Depend
NOTE: The logger is set to wrap when full. Depend
NOTE: The logger is set to wrap when full. Depend
NOTE: The logger is set to wrap when full. Depending on the time graph
ing on the time graph
ing on the time graph
ing on the time graph
interval and the duration of lost AC,
interval and the duration of lost AC,
interval and the duration of lost AC,
interval and the duration of lost AC, older data will be lost.
older data will be lost.
older data will be lost.
older data will be lost.
Wall Mounting
Wall Mounting
Wall Mounting
Wall Mounting
Your Touchscreen includes a wall mount plate, two each: wall anchors, #4 screws.
Follow the steps below for proper placement:
•
Whenever possible, mount plate to studs using #4 screws (included).
•
If studs are not available:
o
Use a 5/32 drill bit to drill 2 pilot holes.
o
Gently tap wall anchors (included) into holes.
o
Secure plate to wall using #4 screws (included).
Warranty
Warranty
Warranty
Warranty
Dickson warrants this line of instruments will be free from defects in material and
workmanship under normal use and service for a period of twelve months, after
delivery. This warranty does not cover routine calibration or battery replacement.
For Specifications and Technical Support, go to
http://www.dicksondata.com
http://www.dicksondata.com
http://www.dicksondata.com
http://www.dicksondata.com
or contact us via telephone at 800.323.2448.
R24 07022012 V3
DICKSON
DICKSON
DICKSON
DICKSON Touch
Touch
Touch
Touchsssscreen Logger
creen Logger
creen Logger
creen Logger
FT620/FT625/FT6
FT620/FT625/FT6
FT620/FT625/FT6
FT620/FT625/FT63
3
3
30
0
0
0////FT640
FT640
FT640
FT640////FT6
FT6
FT6
FT645/
45/
45/
45/FT660
FT660
FT660
FT660
Getting Started
Getting Started
Getting Started
Getting Started
Your Color Touchs
Your Color Touchs
Your Color Touchs
Your Color Touchscreen Logger includes the following
creen Logger includes the following
creen Logger includes the following
creen Logger includes the following::::
•
AC Adapter
•
Probe or Pod
•
Certificate of Calibration
•
Quick Start Manual
*
**
*SD
SD
SD
SD Flash Memory Card
Flash Memory Card
Flash Memory Card
Flash Memory Card, , , , USB Cable and DicksonWa
USB Cable and DicksonWa
USB Cable and DicksonWa
USB Cable and DicksonWare
re
re
re SSSSo
o
o
offffttttw
w
w
wa
aa
arrrreeee aaaarrrreeee sssso
o
o
olllld
d
d
d sssseeeep
p
p
pa
aa
arrrraaaatttteeeellllyyyy....
Presets
Presets
Presets
Presets
•
Model: FT
FT
FT
FT6
6
6
620/FT
20/FT
20/FT
20/FT6
6
6
625/FT
25/FT
25/FT
25/FT6
6
6
630
30
30
30/FT
/FT
/FT
/FT6
6
6
640/FT
40/FT
40/FT
40/FT6
6
6
645
45
45
45/FT
/FT
/FT
/FT6
6
6
660
60
60
60
Time Scale: 1 Hour / Sample every 6 sec
Temperature Range: 0 to 100
Unit of Measure: Deg. F
Alarm: OFF
Quick Start
Quick Start
Quick Start
Quick Start
The Touch
The Touch
The Touch
The Touchsssscreen Logger is a computer
creen Logger is a computer
creen Logger is a computer
creen Logger is a computer device and must be set and restarted
device and must be set and restarted
device and must be set and restarted
device and must be set and restarted p
p
p
prrrriiiio
o
o
orrrr tttto
o
o
o
use
use
use
use....
1)
Plug the AC adapter into a standard electrical outlet, connect the logger to
the AC adapter and slide the power switch up to the “On” position.
2)
Set Time: Press Menu
Setup
Set Time
Save
OK
3)
Set Date: Press Menu
Setup
Set Date
Save
OK
4)
Set Time Scale: Press Menu
Set Scales
Set Time Scales
Save
OK
5)
Power off the logger, wait 10 seconds and power on the logger
6)
Press Current to view current readings. The logger is ready for use when
readings are displayed. If no readings are displayed, repeat the above steps.
Logger Time:
Logger Time:
Logger Time:
Logger Time: The logger does not automatically adjust for daylight savings. You
must manually adjust the logger time during the start and end of Daylight Savings.
Exporting Data:
Exporting Data:
Exporting Data:
Exporting Data: Saved data can be exported to and viewed in DicksonWare
•
The logger must be CLEARED via DicksonWare 17.12 or greater prior to
logging and downloading data.
•
Export data using the USB cable or Flash Memory Card. Open DicksonWare
to view exported data.
•
When running
When running
When running
When running DicksonWare on a computer
DicksonWare on a computer
DicksonWare on a computer
DicksonWare on a computer with Da
with Da
with Da
with Dayyyylllliiiig
g
g
gh
h
h
htttt SSSSa
aa
avvvviiiin
n
n
ng
g
g
gssss sssse
ee
ettttttttiiiin
n
n
ng
g
g
gssss,,,,
adjust
adjust
adjust
adjust the computer
the computer
the computer
the computer as follows:
as follows:
as follows:
as follows:
From Time & Date Settings:
