SERVICE BULLETIN
Replaces SB-6-182-C
DESCRIPTION
PARTS LIST
SPECIFICATIONS
INSTALLATION
SB-6-182-D
130500 CT30 DESICCANT AIR DRYER
The desiccant air dryer is designed to be a point of
use system. It is capable of removing dirt, water, oil,
and water vapor from compressed air. It consists of a
separator and desiccant cartridge. The cartridge has a
housing material that acts like a coalescer and final
filter.
Air Inlet
Air Outlet
Air Flow Capacity
Maximum Operating Pressure
Maximum Temperature
Humidity Indicator
Water Vapor Removal
Particle Removal
Manual Drain
1/2" NPT (Female)
1/2" NPT (Female)
30 CFM
200 PSIG (14 Bar)
150
o
F (65.6
o
C)
Green:
OK
Yellow:
Replace Desiccant
-40
o
F Dew Point
0.1 micron
included
3
1
2
Ref.
No.
Replacement
Part No.
Description
Individual
Parts Req.
1
2
3
4
130505
130511
130510
130504
Humidity Indicator (1 Humidity
Indicator Paper Included)
Drain (Manual)
Gasket
Desiccant Cartridge (Not shown)
1
1
1
1
5
CT-101
Tank Grommet (Not shown)
1
Warning
Warning
Risk of personal injury.
Risk of property damage.
Except as otherwise specified by the
manufacturer, this product is specifically
designed for compressed air service and use
with any other fluid (liquid or gas) is a
misapplication. For example, use with or injection
of certain hazardous gases in the system (such
as oxygen or liquid petroleum gas) could be
harmfull to the unit or result in a combustible
condition that may cause fire or explosion.
Manufacturer's warranties are void in the event of
misapplication and manufacturer assumes no
responsiblity for any resulting loss.
*
*The Material Safety Data Sheet (MSDS-1) is available upon request.
Air Outlet
Air Inlet
Risk of injury. Release all air pressure from
system before servicing system. Use only
specified Camair parts.
5 not shown
(inside tank)
