manualshive.com logo in svg
background image

 

 

                   LCP-1250RJ3SR-L

 

DELTA ELECTRONICS, INC.

 

 

- 1 - 

 

Oct

.

 2007 Rev. 1.02

 

www.deltaww.com

 

RoHS Compliant Copper Small Form-factor Pluggable (SFP) 
Transceiver for Gigabit Ethernet with Rx-Los Indicator

 

Description 

The LCP-1250RJ3SR-L is a 3.3V 

copper small form-factor pluggable (SFP) 
transceiver. It offers full duplex 1000 Mb/s 
Ethernet by transporting data over CAT 5 UTP 
cable

category 5 unshielded twisted pair

with RJ-45 connection.  It takes signals from 
both CAT 5 UTP cable and the SFP SerDes 
interface. 

The LCP-1250RJ3SR-L provides the 

SFP’s RX_LOS pin for the link indication of 
cable side, and also, 1000Base-T auto-nego- 
-tiation is enabled at default over cable link. 

The system host should disable 1000 

BASE-X auto-negotiation while 
LCP-1250RJ3SR-L is used. 

The Gigabit Ethernet SFP ports on host 

systems can work well plugging with both of 
Delta fible SFP transceiver and Delta copper 
SFP transceiver, so there is no need of software 
to configure MAC on host system. 

At enhance, the software can configure the 

PHY device inner LCP-1250RJ3SR-L via SFP 
two-wire-inter- face. LCP-1250RJ3SR-L can also 
be operate on SGMII mode, which provides with 
tri-speed mode, 10/100/1000 Mbps operation over 
1.25 GHz serial interfaces, as long as the host 

system supports the SGMII interface with no clock 
mode on SFP cage. The SGMII interface without 
clock is selected by setting HWCFG_MODE[3:0] 
bits to ‘0100’. 

 

Features 

z

  Compatible with specifications for IEEE 

802.3z/Gigabit Ethernet 

z

  Compliant with MSA specifications for small 

Form Factor Pluggable 

SFP

Ports 

z

  Hot-pluggable SFP footprint 

z

  1000 BASE-T operation in the host system with 

SerDes interface (Default)   

z

  10/100/1000 BASE-T operation in the host 

system with SGMII interface (To be configured) 

z

  Compliant with industry standard RFT electrical 

connector and cage 

z

  EEPROM with serial ID functionality 

z

  LCP-1250RJ3SR-L supports RX_LOS enabled     

z

  Internal PHY IC is configurable by host system 

software via SFP 2-wire-interface   

 

Applications 

z

  Gigabit Ethernet over copper 

z

  Switch to Switch interface 

z

  Switched backplane applications 

z

  File server interface 

 

Performance 

z

 LCP-1250RJ3SR-L data link up to 100m on 

standard CAT 5 UTP 

 

 

Содержание LCP-1250RJ3SR-L










Отзывы: