Dell Inspiron 1300 Service Manual Download

Page: 1 / 44

Dell™ Inspiron™ 1300/B120/B130 Service Manual

Before You Begin

Hinge

System Components

Battery

Memory, Optical Drive, and Mini PCI Card

Hard Drive

Keyboard

Display Assembly

Palm Rest

Modem

Coin-Cell Battery

Microprocessor Thermal-Cooling Assembly

Microprocessor Module

Speakers

System Board

Antenna

Fan

Flashing the BIOS

Base Plastics

Pinout Assignments for I/O Connectors

Model PP21L

Notes, Notices, and Cautions

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo, and

Inspiron

are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for Inspiron 1300













































Search results

Summary of Contents for Inspiron 1300

Reviews:

Related manuals for Inspiron 1300

Brands by name

Popular brands

Dell Inspiron 1300, Service Manual

Search results

Summary of Contents for Inspiron 1300

Reviews:

Related manuals for Inspiron 1300

Brands by name

Popular brands