background image

Dell™ E157FPT Touch Screen Monitor Contents

 

Information in this document is subject to change without notice. 

© 2007 Dell Inc. All rights reserved.

 

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, 

Inspiron

Dell Precision

Dimension

OptiPlex

Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage 

are trademarks of Dell 

Inc.; 

Intel

Pentium, and Celeron 

are registered trademarks of Intel Corporation; 

Microsoft

 and 

Windows

 are registered trademarks of Microsoft Corporation. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

February 2007       Rev. A02

 

About Your Monitor 

Front View

  

Back View

  

Side View

  

Bottom view

  

Specifications

  

Caring for Your Monitor

  

Setting Up Your Monitor 

Connecting Your Monitor

  

Using the OSD

  

On-Screen Menu/Display (OSD)

  

Special OSD Functions

  

OSD Warning Messages

  

Setting the Optimal Resolution

  

Using the Touch Screen Software 

About Your Touch Screen Software

  

Installing Touch Screen Software

  

Uninstalling Touch Screen Software

  

Using the Touch Screen Control Panel

  

Advanced Settings

  

Dell Right Mouse Button Tool (RMBT)

  

Tool Tray

  

Center Desktop Tool

  

Edge Acceleration Tool (EAT)

 

Solving Problems 

General Problems

  

Touch screen Problems

  

Appendix 

Warranty Information

  

CAUTION:General Safety Instructions

  

CAUTION: Monitor Safety Instructions

  

Contacting Dell

  

Regulatory Notices

  

Your Monitor Setup Guide

  

Notes, Notices, and Cautions

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

CAUTION: 

A CAUTION indicates a potential for property damage, personal injury, or death. 

Summary of Contents for E157FPT





















































Reviews: