Model TL-900
Safety and Use Manual
24-30 VDC Powered
3/4 Inch Drive Impact Wrench System
Work Area Safety
Keep work area clean and well lighted.
Cluttered or dark areas invite accidents. Use the LED
light work light on the
Model TL-900
(
shown in Fig. 1)
whenever possible to reduce injuries.
Do not operate the
Model TL-900
in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Although the
Model 900
incorporates safety measures that
enclose sparks, its exterior metal parts may create sparks that can ignite flammable materials.
Keep bystanders, children and visitors away while operating the
Model TL-900.
Distractions
can cause you to lose control.
Make sure vehicles are braked, chocked and stable.
Use extreme caution when working on or around a vehicle on a jack.
Electrical Safety
The Anderson quick connector ( shown in Fig. 1) on your
Model TL-900
must match another
Anderson quick connector.
Mismatched connectors create the risk of electrical shorting.
Make sure the cables, switches and power connector are in good working order
before making a secure connection.
Damaged cables, plug, switches or receptacles will reduce
the amount of power available to the tool and potentially cause damage to it or the vehicle.
Do not immerse the
Model TL-900
in standing water.
Do not abuse the power cables. Never use the cord for carrying, pulling or unplugging the
tool. Keep the cables away from sharp edges and moving parts.
Make sure the power cables are free from snags and tangles before operating the tool sys-
tem.
Personal Safety
Always stay alert and use common sense when operating the
Model TL-900.
Never operate
the tool while tired or under the influence of drugs, alcohol or medication.
The
Model TL-900
is a very powerful tool that can cause serious personal injury and property damage if not properly
used.
Use safety equipment. Always wear eye and ear protection.
Safety equipment such as dust
masks, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will
reduce personal injuries.
Avoid accidental start up of the
Model TL-900
by applying power only when ready to use. Un-
plug immediately when work is completed.
Keep the trigger free from obstructions
.
Make sure any attachments such as sockets, adapters and torque extensions are secured to
the tool’s square drive prior to operating the
Model TL-900.
Do not overreach. Keep proper footing and balance at all times. Make sure cables are free
from snags and tangles when using the
Model TL-900
off the ground.
Dress properly. Do not wear loose fitting clothing or jewelry. Make sure hair, clothing and
gloves are away from moving parts.
Keep your
Model TL-900
handle clean from oil and grease. Holding a slippery handle will
make it difficult to safely control this powerful tool.
