INSTRUCTION MANUAL
1. Read all instructions before use.
2. After installation, check to see if all the parts are correctly
installed, and see if all the screws are torqued properly.
3. Do not adjust the damper while riding.
4. Periodical inspection of the installed parts is required every
500km (300mile). If anything unusual may be found while
riding, pull over at a safe place to check.
Thank you for purchasing DAYTONA STEERING DAMPER KIT.
Product Features
- Stabilizes steering especially at high speed.
-
Prevents the front forks from being twisted during high speed
cornering.
- Bolt-on mount. The kit inclides application specific brackets and
all hardware for easy mounting.
Install
37582 / 80674 : 20210915
STEERING DAMPER KIT
for H-D FXST (’00-’07)
PAGE 1 of 2
Before installing, turn the adjustable knob
counter-clockwise to the end.
Fig.1
Softer
*Install stabilizer on the right side of motorcycle.
Install FORK BRACKET
1. Attach fork bracket(#2) on the right front fork tube.
Install FRAME BRACKET
Install DAMPER BODY
3. Install the DAMPER BODY(#1)
with the M8X30 BUTTON HEAD SCREW.
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
#2. FORK BRACKET SET
LOWER TRIPLE CRAMP
L-FORK TUBE
#2. FORK BRACKET
LOWER TRIPLE CRAMP
25-30 degrees
M6X20 CAP SCREW
M6X20 CAP SCREW
#3. FRAME BRACKET SET
FRAME DOUN TUBE
#4. M8X25 BUTTON HEAD SCREW
#1. DAMPER BODY
#2. FORK BRACKET
Apply thread locking fluid
2. Attach frame bracket(#3)
on the right side frame down tube.
FWD.
FWD.
FWD.
FWD.
FWD.
